Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee
Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee — metric adapter, branch tee body, 10 orderable sizes on this page. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: branch tee
- Port A Thread: Metric M14×1.5 to M45×2
- Port A Sealing: Metric 37° cone (74° included)
- Nominal Size Range: -14 to -45
- Max Working Pressure: up to 315 bar (4,569 psi), manufacturer stated
- Body Configuration
- branch tee
- Port A Thread
- Metric M14×1.5 to M45×2
- Port A Sealing
- Metric 37° cone (74° included)
- Nominal Size Range
- -14 to -45
- Max Working Pressure
- up to 315 bar (4,569 psi), manufacturer stated
Product description
The Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee is a branch tee hydraulic adapter in the Indus metric range. Every size the manufacturer publishes is listed in the Sizes & Part Numbers tab, with the thread on each end, the dimensions, the weight and the working pressure.
Construction
- Body configuration: branch tee
- Port A: Metric Male 74° Cone
- Port B: Metric Male Adjustable Stud End L-Series ISO 6149-3
- Material: carbon steel (stainless steel available on request)
- Surface treatment: zinc-plated, Cr3+ passivated, RoHS-compliant
Threads
- Port A: Metric M14×1.5 to M45×2
- Port B: Metric M12×1.5 to M42×2
- Port C: Metric M14×1.5 to M45×2
Sealing
Metric 37° cone (74° included) and Metric O-ring stud end. Match the seat as well as the thread — a thread that engages against the wrong seat will weep under pressure, and several of these families share a thread while sealing differently.
Performance
The manufacturer states 100 to 315 bar depending on size, printed against every size in the table. That is the rating of the adapter; an assembly is limited by whichever component is rated lowest — the hose, the tube or the port.
Applicable standards
ISO 8434-2 profile, metric thread, ISO 6149.
How to order
Quote the Indus part number from the size table. If you have only the ports, send us the thread on each end and whether you need carbon steel or stainless, and Indus engineering will confirm the part number against your equipment.
Companion products
These are tube and port adapters, not hose ends. For hose assemblies pair them with Indus crimp ferrules and the matching hose-end fitting; for tube runs, with Indus cutting rings and end nuts.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | branch tee |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | Metric M14×1.5 to M45×2 |
| Port A Sealing | Metric 37° cone (74° included) |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | Metric M12×1.5 to M42×2 |
| Port B Sealing | Metric O-ring stud end |
| Port B Gender | male |
Port C
| Parameter | Value |
|---|---|
| Port C Thread | Metric M14×1.5 to M45×2 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -14 to -45 |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 315 bar (4,569 psi), manufacturer stated |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 8434-2 profile, metric thread, ISO 6149 |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | End 1 | End 2 | End 3 | S1 (mm) | S2 (mm) | L1 (mm) | L2 (mm) | L3 (mm) | Working pressure (bar) |
|---|---|---|---|---|---|---|---|---|---|
| IH-AD-MET-046-141214OG | M14X1.5 | M12X1.5 | M14X1.5 | 14 | 17 | 28.5 | 31 | 28.5 | 315 |
| IH-AD-MET-046-161416OG | M16X1.5 | M14X1.5 | M16X1.5 | 16 | 19 | 30.5 | 31 | 30.5 | 250 |
| IH-AD-MET-046-181618OG | M18X1.5 | M16X1.5 | M18X1.5 | 19 | 22 | 31.5 | 33.5 | 31.5 | 250 |
| IH-AD-MET-046-221822OG | M22X1.5 | M18X1.5 | M22X1.5 | 22 | 24 | 34 | 37.5 | 34 | 200 |
| IH-AD-MET-046-272227OG | M27X1.5 | M22X1.5 | M27X1.5 | 27 | 27 | 37.5 | 41.5 | 37.5 | 200 |
| IH-AD-MET-046-302730OG | M30X1.5 | M27X2 | M30X1.5 | 30 | 32 | 42.8 | 48.5 | 42.8 | 160 |
| IH-AD-MET-046-332733OG | M33X2 | M27X2 | M33X2 | 33 | 32 | 45.5 | 48.5 | 45.5 | 160 |
| IH-AD-MET-046-363336OG | M36X2 | M33X2 | M36X2 | 36 | 41 | 47 | 51.5 | 47 | 160 |
| IH-AD-MET-046-393339OG | M39X2 | M33X2 | M39X2 | 41 | 41 | 50 | 51.5 | 50 | 125 |
| IH-AD-MET-046-454245OG | M45X2 | M42X2 | M45X2 | 46 | 50 | 54 | 56.5 | 54 | 100 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. L2 — Dimension L2 on the manufacturer dimension drawing. L3 — Dimension L3 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What sizes does the Metric Male 74° Cone × Metric Male Adjustable Stud End Branch Tee come in?▾
Is it available in stainless steel?▾
Can I get it faster than the quoted lead time?▾
What pressure is it rated for?▾
What thread family does this adapter use?▾
What are the port specs?▾
What sizes are available?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Is this adapter interchangeable with other thread families?▾
Do I need to crimp this onto a hose?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- T-Stück metrisch Außengewinde auf metrisch Außengewinde
- fr
- té métrique mâle sur métrique mâle
- es
- te métrica macho a métrica macho
- it
- raccordo a T metrica maschio a metrica maschio
From the blog
Written about this range
Thread & fitting identification
Korean excavator hydraulic fittings: expect more than one convention
These machines sit between the Japanese and European worlds, and the honest answer is that a single machine can carry both. What that means for how you identify and how you stock.
3 min read
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Failure analysis
Why a new hose assembly weeps, and what to check before blaming the crimp
A hose fitted this morning is damp by the afternoon. The crimp is the last thing to suspect, not the first — and there are five checks ahead of it that take a minute each.
6 min read
Engineers viewing this also looked at
Metric Male 74° Cone Bulkhead
Metric Male 74° Cone × Metric Male Adjustable Stud End Run Tee
90° Elbow Metric Male 74° Cone Bulkhead
JIS Metric Male 60° Cone Plug
JIS Metric Male 60° Cone Tee
JIS Metric Male 60° Cone × BSPT Male
JIS Metric Male 60° Cone × Metric Male
