
Plug Metric — Metric family plug for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: plug
- Port A Thread: Metric M10×1 to M42×2 (24° cone)
- Port A Sealing: 24-cone
- Nominal Size Range: M10×1 to M42×2
- Max Working Pressure: up to 400 bar
- Body Configuration
- plug
- Port A Thread
- Metric M10×1 to M42×2 (24° cone)
- Port A Sealing
- 24-cone
- Nominal Size Range
- M10×1 to M42×2
- Max Working Pressure
- up to 400 bar
Product description
The Plug Metric is a Blanking plug hydraulic adapter in the Metric family. Plug Metric — Metric family plug for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Blanking plug
- Port A: Male — Metric M10×1 to M42×2 (24° cone) (24° cone (DIN bite-type))
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 400 bar. Metric family — 24° cone to ISO 8434-1 / DIN 2353, metric ports to ISO 6149 / DIN 3852-1. Common on European OEM equipment.
Applicable Standards
- ISO 8434-1 / DIN 2353 (24° cone)
- ISO 6149 / DIN 3852-1 (metric ports)
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | plug |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | Metric M10×1 to M42×2 (24° cone) |
| Port A Sealing | 24-cone |
| Port A Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | M10×1 to M42×2 |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 400 bar |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 8434-1, DIN 2353, ISO 6149, DIN 3852-1 |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-AD-MET-007-14
- Thread
- M14X1.5
- S1 (mm)
- 17
- A (mm)
- 11
- L (mm)
- 17
- O-ring
- 10×1.9
- Indus part no.IH-AD-MET-007-16
- Thread
- M16X1.5
- S1 (mm)
- 17
- A (mm)
- 11
- L (mm)
- 17
- O-ring
- 11×1.9
- Indus part no.IH-AD-MET-007-18
- Thread
- M18X1.5
- S1 (mm)
- 19
- A (mm)
- 11
- L (mm)
- 17
- O-ring
- 13×1.9
- Indus part no.IH-AD-MET-007-22
- Thread
- M22X1.5
- S1 (mm)
- 24
- A (mm)
- 12
- L (mm)
- 20
- O-ring
- 16×2.4
- Indus part no.IH-AD-MET-007-27
- Thread
- M27X1.5
- S1 (mm)
- 30
- A (mm)
- 13
- L (mm)
- 23
- O-ring
- 20×2.4
- Indus part no.IH-AD-MET-007-30
- Thread
- M30X1.5
- S1 (mm)
- 32
- A (mm)
- 14
- L (mm)
- 25
- O-ring
- 24×2.4
- Indus part no.IH-AD-MET-007-36
- Thread
- M36X2
- S1 (mm)
- 38
- A (mm)
- 16
- L (mm)
- 29
- O-ring
- 30×3.1
- Indus part no.IH-AD-MET-007-39
- Thread
- M39X2
- S1 (mm)
- 41
- A (mm)
- 18
- L (mm)
- 31
- O-ring
- 32×3.1
Show all 12 sizesShow fewer sizes
- Indus part no.IH-AD-MET-007-42
- Thread
- M42X2
- S1 (mm)
- 46
- A (mm)
- 20
- L (mm)
- 33
- O-ring
- 35×3.1
- Indus part no.IH-AD-MET-007-45
- Thread
- M45X2
- S1 (mm)
- 46
- A (mm)
- 21
- L (mm)
- 34
- O-ring
- 38×3.1
- Indus part no.IH-AD-MET-007-52
- Thread
- M52X2
- S1 (mm)
- 55
- A (mm)
- 22
- L (mm)
- 37
- O-ring
- 40×3.1
- Indus part no.IH-AD-MET-007-60
- Thread
- M60X2
- S1 (mm)
- 65
- A (mm)
- 24
- L (mm)
- 41
- O-ring
- 45×3.1
S1 — Dimension S1 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. O-ring — O-ring size supplied with the fitting, as inside diameter × section. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the Plug Metric used for and which ports does it connect?▾
What is the part number for M14×1.5 in the Plug Metric?▾
Which sizes of the Plug Metric are available?▾
How do I choose the right Plug Metric for my port threads?▾
What is the working pressure of the Plug Metric?▾
What is the Plug Metric made from, and is it suitable for my fluid?▾
Which standards does the Plug Metric conform to, and can I get test certificates?▾
What mates with the Plug Metric, and which fittings do I pair it with?▾
How does the Plug Metric seal, and what should I check when fitting it?▾
How does the Plug Metric differ from the Plug Metric Seal Flat?▾
Where is the Plug Metric made, and can you export it from Dubai?▾
Do you stock the Plug Metric in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- metrisch Verschlussstopfen
- fr
- métrique bouchon mâle
- es
- métrica tapón macho
- it
- metrica tappo
From the blog
Written about this range
Thread & fitting identification
Korean excavator hydraulic fittings: expect more than one convention
These machines sit between the Japanese and European worlds, and the honest answer is that a single machine can carry both. What that means for how you identify and how you stock.
3 min read
Buying fittings & adapters
Metric hydraulic adapters: ISO 6149 and DIN 3852 ports, ED seals, metric cones and Komatsu fittings
An M22×1.5 port can seal on an O-ring in its chamfer (ISO 6149), on a soft seal under the hex (DIN 3852 / ISO 9974 form E) or on a metal edge — and the adapter has to match. Then there are the metric tube ends: 24° cone, 74° cone and the Komatsu 30° flare, whose M33×1.5 thread will not enter an M33×2 port. The steel metric range, the port forms and ratings, and how to order.
7 min read
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read








