90° Toyota Female Hose Fitting (JIS Metric)
90° elbow hose fitting with Toyota OEM-spec metric thread and 30° flare seat — for service of Toyota construction, agricultural, and material-handling equipment. 90 elbow, JIS metric (Toyota OEM thread spec), 30° flare seat, 60° included (Japanese OEM).
Key features
- Fitting Configuration: 90-elbow
- Thread Form: JIS metric (Toyota OEM thread spec)
- Sealing Form: 30° flare seat, 60° included (Japanese OEM)
- Nominal Size Range: M14 – M30 (Toyota OEM size range)
- Fitting Configuration
- 90-elbow
- Thread Form
- JIS metric (Toyota OEM thread spec)
- Sealing Form
- 30° flare seat, 60° included (Japanese OEM)
- Nominal Size Range
- M14 – M30 (Toyota OEM size range)
Product description
The 90° Toyota Female Hose Fitting (JIS Metric) is a 90 elbow hydraulic hose fitting in the JIS family — female-swivel thread with 30° flare seat, 60° included (Japanese OEM) sealing form. Compliant with JIS B 8363 (analogous), Toyota OEM specification.
Construction
- Configuration: 90-elbow
- Thread form: JIS metric (Toyota OEM thread spec)
- Sealing form: 30° flare seat, 60° included (Japanese OEM)
- Gender: female-swivel
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
- Notes: Toyota-spec thread/seat geometry — verify your equipment with the parts catalogue before ordering
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- JIS B 8363 (analogous)
- Toyota OEM specification
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | 90-elbow |
| Thread Form | JIS metric (Toyota OEM thread spec) |
| Sealing Form | 30° flare seat, 60° included (Japanese OEM) |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | M14 – M30 (Toyota OEM size range) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | JIS B 8363 (analogous), Toyota OEM specification |
Shipping & lead time
Sizes & part numbers
10 sizes| Indus part no. | Hose bore | Flange size | S1 (mm) | S2 (mm) | A (mm) | C (mm) | H (mm) |
|---|---|---|---|---|---|---|---|
| IH-JP-TOYOTA-FEM-90-0404 | -04 · 1/4" · DN6 | G1/4"×19 | 19 | 19 | 30 | 8 | 38 |
| IH-JP-TOYOTA-FEM-90-0504 | -05 · 5/16" · DN8 | G1/4"×19 | 19 | 19 | 33 | 8 | 41 |
| IH-JP-TOYOTA-FEM-90-0606 | -06 · 3/8" · DN10 | G3/8"×19 | 22 | 22 | 35.3 | 9 | 45.8 |
| IH-JP-TOYOTA-FEM-90-0808 | -08 · 1/2" · DN12 | G1/2"×14 | 27 | 27 | 41 | 12 | 53 |
| IH-JP-TOYOTA-FEM-90-1010 | -10 · 5/8" · DN16 | G5/8"×14 | 30 | 30 | 56.5 | 11.5 | 61 |
| IH-JP-TOYOTA-FEM-90-1212 | -12 · 3/4" · DN20 | G3/4"×14 | 32 | 32 | 65.5 | 13.5 | 69 |
| IH-JP-TOYOTA-FEM-90-1616 | -16 · 1" · DN25 | G1"×11 | 41 | 41 | 76.7 | 16 | 76.5 |
| IH-JP-TOYOTA-FEM-90-2020 | -20 · 1.1/4" · DN32 | G1.1/4"×11 | 50 | 50 | 91.5 | 18.5 | 92.5 |
| IH-JP-TOYOTA-FEM-90-2424 | -24 · 1.1/2" · DN40 | G1.1/2"×11 | 55 | 55 | 109.4 | 19 | 110.5 |
| IH-JP-TOYOTA-FEM-90-3232 | -32 · 2" · DN50 | G2"×11 | 70 | 70 | 131.8 | 23 | 133.8 |
S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. H — Dimension H on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What thread family does this fitting use?▾
What thread sizes are available?▾
What is the sealing form?▾
What is the maximum working pressure?▾
What materials and finishes are available?▾
Which crimp ferrule should I pair with this fitting?▾
Is crimping included?▾
Lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlaucharmatur 90° Bogen metrisch Innengewinde auf metrisch
- fr
- embout de flexible coude 90° métrique femelle sur métrique
- es
- racor de manguera codo 90° métrica hembra a métrica
- it
- raccordo per tubo flessibile gomito 90° metrica femmina a metrica
Engineers viewing this also looked at
JIS Flange Hose Fitting
45° JIS Flange Hose Fitting
90° JIS Flange Hose Fitting
JIS Gas Male 60° Cone Hose Fitting
Komatsu Female Hose Fitting (JIS Metric)
90° Komatsu Female Hose Fitting (JIS Metric)
Komatsu Male Hose Fitting (JIS Metric)
