Toyota Female Hose Fitting (JIS Metric)

Straight hose fitting with Toyota OEM-spec metric thread and 30° flare seat — for hose service on Toyota equipment. straight, JIS metric (Toyota OEM thread spec), 30° flare seat, 60° included (Japanese OEM).
Key features
- Fitting Configuration: straight
- Thread Form: JIS metric (Toyota OEM thread spec)
- Sealing Form: 30° flare seat, 60° included (Japanese OEM)
- Nominal Size Range: M14 – M30 (Toyota OEM size range)
- Fitting Configuration
- straight
- Thread Form
- JIS metric (Toyota OEM thread spec)
- Sealing Form
- 30° flare seat, 60° included (Japanese OEM)
- Nominal Size Range
- M14 – M30 (Toyota OEM size range)
Product description
The Toyota Female Hose Fitting (JIS Metric) is a straight hydraulic hose fitting in the JIS family — female-swivel thread with 30° flare seat, 60° included (Japanese OEM) sealing form. Compliant with JIS B 8363 (analogous), Toyota OEM specification.
Construction
- Configuration: straight
- Thread form: JIS metric (Toyota OEM thread spec)
- Sealing form: 30° flare seat, 60° included (Japanese OEM)
- Gender: female-swivel
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
- Notes: Toyota-spec thread/seat geometry
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Tested to manufacturer-recommended impulse cycles when crimped to the correct ferrule diameter. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- JIS B 8363 (analogous)
- Toyota OEM specification
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule (see the Crimp Ferrules category), and (c) the thread size you need. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. For other thread families see the Metric, BSP, JIC 37°, DIN, and Japanese sub-categories under Hose Fittings.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | straight |
| Thread Form | JIS metric (Toyota OEM thread spec) |
| Sealing Form | 30° flare seat, 60° included (Japanese OEM) |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | M14 – M30 (Toyota OEM size range) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | JIS B 8363 (analogous), Toyota OEM specification |
Shipping & lead time
Sizes & part numbers
14 sizes- Indus part no.IH-JP-TOYOTA-FEM-0302
- Hose bore
- -03 · 3/16" · DN5
- Size
- G1/8"×28
- S1 (mm)
- 14
- S2 (mm)
- 14
- A (mm)
- 20
- C (mm)
- 7
- Indus part no.IH-JP-TOYOTA-FEM-0404
- Hose bore
- -04 · 1/4" · DN6
- Size
- G1/4"×19
- S1 (mm)
- 19
- S2 (mm)
- 19
- A (mm)
- 21
- C (mm)
- 8
- Indus part no.IH-JP-TOYOTA-FEM-0406
- Hose bore
- -04 · 1/4" · DN6
- Size
- G3/8"×19
- S1 (mm)
- 22
- S2 (mm)
- 22
- A (mm)
- 24
- C (mm)
- 9
- Indus part no.IH-JP-TOYOTA-FEM-0504
- Hose bore
- -05 · 5/16" · DN8
- Size
- G1/4"×19
- S1 (mm)
- 19
- S2 (mm)
- 19
- A (mm)
- 21
- C (mm)
- 8
- Indus part no.IH-JP-TOYOTA-FEM-0606
- Hose bore
- -06 · 3/8" · DN10
- Size
- G3/8"×19
- S1 (mm)
- 22
- S2 (mm)
- 22
- A (mm)
- 23
- C (mm)
- 9
- Indus part no.IH-JP-TOYOTA-FEM-0608
- Hose bore
- -06 · 3/8" · DN10
- Size
- G1/2"×14
- S1 (mm)
- 27
- S2 (mm)
- 27
- A (mm)
- 28
- C (mm)
- 12
- Indus part no.IH-JP-TOYOTA-FEM-0808
- Hose bore
- -08 · 1/2" · DN12
- Size
- G1/2"×14
- S1 (mm)
- 27
- S2 (mm)
- 27
- A (mm)
- 26.5
- C (mm)
- 12
- Indus part no.IH-JP-TOYOTA-FEM-1010
- Hose bore
- -10 · 5/8" · DN16
- Size
- G5/8"×14
- S1 (mm)
- 30
- S2 (mm)
- 30
- A (mm)
- 31
- C (mm)
- 11.5
Show all 14 sizesShow fewer sizes
- Indus part no.IH-JP-TOYOTA-FEM-1012
- Hose bore
- -10 · 5/8" · DN16
- Size
- G3/4"×14
- S1 (mm)
- 32
- S2 (mm)
- 32
- A (mm)
- 28.5
- C (mm)
- 13.5
- Indus part no.IH-JP-TOYOTA-FEM-1212
- Hose bore
- -12 · 3/4" · DN20
- Size
- G3/4"×14
- S1 (mm)
- 32
- S2 (mm)
- 32
- A (mm)
- 28.5
- C (mm)
- 13.5
- Indus part no.IH-JP-TOYOTA-FEM-1616
- Hose bore
- -16 · 1" · DN25
- Size
- G1"×11
- S1 (mm)
- 41
- S2 (mm)
- 41
- A (mm)
- 32
- C (mm)
- 16
- Indus part no.IH-JP-TOYOTA-FEM-2020
- Hose bore
- -20 · 1.1/4" · DN32
- Size
- G1.1/4"×11
- S1 (mm)
- 50
- S2 (mm)
- 50
- A (mm)
- 43
- C (mm)
- 18.5
- Indus part no.IH-JP-TOYOTA-FEM-2424
- Hose bore
- -24 · 1.1/2" · DN40
- Size
- G1.1/2"×11
- S1 (mm)
- 55
- S2 (mm)
- 55
- A (mm)
- 43.5
- C (mm)
- 19
- Indus part no.IH-JP-TOYOTA-FEM-3232
- Hose bore
- -32 · 2" · DN50
- Size
- G2"×11
- S1 (mm)
- 70
- S2 (mm)
- 70
- A (mm)
- 46.5
- C (mm)
- 23
S1 — Dimension S1 on the manufacturer dimension drawing. S2 — Dimension S2 on the manufacturer dimension drawing. A — Dimension A on the manufacturer dimension drawing. C — Dimension C on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the Toyota Female Hose Fitting (JIS Metric) used for?▾
How do I read the part number IH-JP-TOYOTA-FEM-1010 on the Toyota Female Hose Fitting (JIS Metric)?▾
What sizes does the Toyota Female Hose Fitting (JIS Metric) come in?▾
How do I choose the right size of Toyota Female Hose Fitting (JIS Metric)?▾
What is the working pressure of the Toyota Female Hose Fitting (JIS Metric)?▾
What is the Toyota Female Hose Fitting (JIS Metric) made of, and how is it finished?▾
Which standard does the Toyota Female Hose Fitting (JIS Metric) follow?▾
What does the Toyota Female Hose Fitting (JIS Metric) connect to?▾
How do I fit and tighten the Toyota Female Hose Fitting (JIS Metric)?▾
How does the Toyota Female Hose Fitting (JIS Metric) differ from the 45° Toyota Female Hose Fitting (JIS Metric)?▾
Where is the Toyota Female Hose Fitting (JIS Metric) made, and can you export it from Dubai?▾
Do you have the Toyota Female Hose Fitting (JIS Metric) in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Schlaucharmatur metrisch Innengewinde auf metrisch
- fr
- embout de flexible métrique femelle sur métrique
- es
- racor de manguera métrica hembra a métrica
- it
- raccordo per tubo flessibile metrica femmina a metrica
From the blog
Written about this range
Thread & fitting identification
Fittings on a used Japanese machine: the 30° seat problem
Two common families share a 30° seat and use different threads underneath it. Checking the angle alone tells you they match, and they do not — here is how to separate them.
3 min read
Assembly, crimping & certification
BSP, metric, DIN and JIS hose fittings: 60° cones, 24° cones, banjos and Komatsu ends
A hose end has to match the port the machine was built with, and on European and Asian machines that means one of four families: BSP 60° cone, metric 24° cone (light or heavy), metric 60° and 74° cones, or JIS — including the Komatsu 30° flare on 1.5 mm-pitch threads that fits nothing else. The hose-end range for each family, the ISO 12151 parts that define them, banjos, multiseal and flat-seat ends, and how to identify the one you need.
6 min read








