Category
Hoses & Fittings
Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Hoses & Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Gabon, Republic of the Congo
- Southern Africa
- South Africa, Zimbabwe, Namibia
JIC 37° Female Swivel 90° Elbow Crimp Fitting for Spiral Hose
Set of Bolts and Spring Washers
90° JIC Male 74° Cone × SAE Flange
Retaining Nut, DIN 3870 Heavy Series
Metric Female 24° Cone (Heavy Series) Hose Fitting
90° SAE Female 45° Cone Hose Fitting
90° Metric Female 60° Cone Hose Fitting
Swivel Nut Branch Tee (DIN 2353)
90° Elbow BSP Male 60° Seat Bulkhead
Specialty Crimp Ferrule for PTFE / Teflon Hose
Male Connector m JIC X m SAE
JIC 37° Female Swivel 90° Long Drop Crimp Fitting for Braided Hose
JIC Female 37° Seat Slip-on Nut Hose Fitting
SAE Code 61 Flange Head Crimp Fitting for Braided Hose
Male Stud Connector NPT (DIN 2353)
45° Swivel Connector m JIC X f JIC
Adjustable 90° Elbow m ORFS X m SAE
NPSM swivel female 60° cone (45º elbow)
NPT Male Rigid Crimp Fitting for Spiral Hose
DIN Light Metric 24° Female Swivel 90° Elbow Crimp Fitting for Spiral Hose
45° Metric Female 24° Cone (Heavy Series) Hose Fitting
Welding standpipes
Double hexagonal JIC 37º swivel female
Swivel Nut Union
JIS Gas Male 60° Cone × JIS Gas Male 60° Cone
Metric Male O-Ring × Metric Female Run Tee
90° Male Female Connector m JIC X f JIC
Skive Interlock Crimp Ferrule for 4SH Hose
DIN Light Metric 24° Cone Male Crimp Fitting for Braided Hose
From the blog
Written about this range
Assembly, crimping & certification
Getting a hydraulic hose made: what to bring and what we measure
Bring the old hose if you have it. If you do not, four measurements and two photographs will get the assembly built correctly first time.
3 min read
Thread & fitting identification
BSPP vs BSPT: why a parallel thread needs a seal and a tapered one does not
They share a thread form and a size designation, and they do not seal the same way. How to tell them apart on the bench, and what happens when they are mixed.
3 min read
Failure analysis
Hose routing: bend radius, twist and the failures they cause
Three installation faults account for a large share of premature hose failure, and all three are free to avoid at fitting time. What they look like and how to design them out.
3 min read