Stainless Steel ORB Male × JIC 37° Female Swivel Connector
Stainless Steel ORB Male × JIC 37° Female Swivel Connector in 316L stainless steel, forged. 10 part numbers, 1/4" to 2"; the size table gives the size on each end, dimensions in millimetres and the Parker equivalent for every Indus part number.
Key features
- Body Configuration: straight connector
- Port A Thread: SAE O-ring boss (ORB), 1/4" to 2" (7/16-20 to 2-1/2-12)
- Port A Sealing: SAE straight-thread port sealed by an O-ring under the hex
- Nominal Size Range: 1/4" to 2"
- Max Working Pressure: Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table
- Body Configuration
- straight connector
- Port A Thread
- SAE O-ring boss (ORB), 1/4" to 2" (7/16-20 to 2-1/2-12)
- Port A Sealing
- SAE straight-thread port sealed by an O-ring under the hex
Product description
The Stainless Steel ORB Male × JIC 37° Female Swivel Connector is a straight connector in 316L stainless steel, forged from one piece. It carries an SAE O-ring boss (ORB) male end and a 37° JIC female end. Stainless steel is chosen where corrosion rules out zinc-plated carbon steel: offshore and marine lines, chemical, fertiliser and petroleum plant, and food, beverage and pharmaceutical process equipment.
Construction
- Body: straight connector
- End 1: SAE O-ring boss (ORB) male
- End 2: 37° JIC female swivel
- Material: 316L stainless steel, forged
Ends and sealing
- SAE O-ring boss (ORB): SAE straight-thread port sealed by an O-ring under the hex; SAE J1926 / ISO 11926.
- 37° JIC: 37° flare, a metal-to-metal seat on a 74° included cone; SAE J514 / ISO 8434-2.
Sizes
10 part numbers, 1/4" to 2". The Sizes & Part Numbers tab lists the size on each end, dimensions in millimetres and the Parker equivalent for every one.
- End 1: 1/4" ORB (7/16-20) to 2" ORB (2-1/2-12)
- End 2: 1/4" JIC 37° (7/16-20) to 2" JIC 37° (2-1/2-12)
Pressure rating
Manufacturer's published ratings (SAE J514), from 1,000 to 5,000 psi depending on size and end:
| Nom. SAE Dash Size | Nom. Tube O.D. Inches | 37 Degree Flare Straight Thread | Nom. Pipe Size | SAE St. Threads Union & Bulkhead (PSI) | Fittings With Pipe Threads (PSI) |
|---|---|---|---|---|---|
| 2 | 1/8 | 5/16-24 | 1/8 | 5000 | 5000 |
| 3 | 3/16 | 3/8-24 | 1/8 | 5000 | 5000 |
| 4 | 1/4 | 7/16-20 | 1/8 | 5000 | 5000 |
| 5 | 5/16 | 1/2-20 | 1/8 | 5000 | 5000 |
| 6 | 3/8 | 9/16-18 | 1/4 | 5000 | 5000 |
| 8 | 1/2 | 3/4-16 | 3/8 | 4500 | 4000 |
| 10 | 5/8 | 7/8-14 | 1/2 | 3500 | 3000 |
| 12 | 3/4 | 1 1/16-12 | 3/4 | 3500 | 3000 |
| 14 | 7/8 | 1 3/16-12 | 3/4 | 3000 | 2500 |
| 16 | 1 | 1 5/16-12 | 1 | 3000 | 2000 |
| 20 | 1 1/4 | 1 5/8-12 | 1 1/4 | 2500 | 1150 |
| 24 | 1 1/2 | 1 7/8-12 | 1 1/2 | 2000 | 1000 |
| 32 | 2 | 2 1/2-12 | 2 | 1500 | 1000 |
NOTE: Since many factors influence the pressure at which a system will or will not perform satisfactory, values shown in this table should not be construed as guaranteed minimum.
Parker equivalents
For 7 of the 10 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end and the material, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | straight connector |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | SAE O-ring boss (ORB), 1/4" to 2" (7/16-20 to 2-1/2-12) |
| Port A Sealing | SAE straight-thread port sealed by an O-ring under the hex |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | 37° JIC, 1/4" to 2" (7/16-20 to 2-1/2-12) |
| Port B Sealing | 37° flare, a metal-to-metal seat on a 74° included cone |
| Port B Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/4" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Up to 5,000 psi, falling with size (SAE J514, manufacturer); see the table |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel, forged |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J1926, ISO 11926, SAE J514, ISO 8434-2, ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
10 sizesEquivalent to Parker F65OX-SS, Aeroquip 259-2266 and SSP JS#GC. Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Aeroquip equivalent | SSP equivalent | End 1 | End 2 | Y (mm) | Y1 (mm) | D1 (mm) | D2 (mm) | L (mm) | L1 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| IH-SS-6402-04-04 | 4 F65OX-SS | 259-2266-4-4 | JS4GC | 1/4" ORB (7/16-20) | 1/4" JIC 37° (7/16-20) | 14.3 | 14.3 | 4.4 | 4.4 | 25.9 | 33.3 |
| IH-SS-6402-06-06 | 6 F65OX-SS | 259-2266-6-6 | JS6GC | 3/8" ORB (9/16-18) | 3/8" JIC 37° (9/16-18) | 17.5 | 17.5 | 7.5 | 7.5 | 29.2 | 37.6 |
| IH-SS-6402-08-06 | — | — | — | 1/2" ORB (3/4-16) | 3/8" JIC 37° (9/16-18) | — | — | — | — | — | — |
| IH-SS-6402-08-08 | 8 F65OX-SS | 259-2266-8-8 | JS8GC | 1/2" ORB (3/4-16) | 1/2" JIC 37° (3/4-16) | 22.2 | 22.2 | 9.9 | 9.9 | 32.5 | 41.9 |
| IH-SS-6402-10-10 | — | — | — | 5/8" ORB (7/8-14) | 5/8" JIC 37° (7/8-14) | 25.4 | 25.4 | 12.3 | 12.3 | 36.3 | 47.8 |
| IH-SS-6402-12-12 | 12 F65OX-SS | 259-2266-12-12 | JS12GC | 3/4" ORB (1-1/16-12) | 3/4" JIC 37° (1-1/16-12) | 31.8 | 31.8 | 15.5 | 15.5 | 41.4 | 54.6 |
| IH-SS-6402-16-16 | 16 F65OX-SS | 259-2266-16-16 | JS16GC | 1" ORB (1-5/16-12) | 1" JIC 37° (1-5/16-12) | 38.1 | 38.1 | 21.4 | 21.4 | 43.7 | 57.7 |
| IH-SS-6402-20-20 | 20 F65OX-SS | 259-2266-20-20 | JS20GC | 1-1/4" ORB (1-5/8-12) | 1-1/4" JIC 37° (1-5/8-12) | 47.6 | 50.8 | 27.4 | 27.4 | 47 | 61 |
| IH-SS-6402-24-24 | 24 F65OX-SS | 259-2266-24-24 | JS24GC | 1-1/2" ORB (1-7/8-12) | 1-1/2" JIC 37° (1-7/8-12) | 54 | 57.1 | 33.4 | 33.4 | 50.5 | 67.8 |
| IH-SS-6402-32-32 | — | — | — | 2" ORB (2-1/2-12) | 2" JIC 37° (2-1/2-12) | 69.8 | 73 | 45.2 | 45.2 | 55.4 | 78 |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Y — Hex across flats — printed "Y HEX" on the manufacturer drawing. Y1 — Second hex across flats — printed "Y1 HEX" on the manufacturer drawing. D1 — Dimension D1 on the manufacturer dimension drawing. D2 — Dimension D2 on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. L1 — Dimension L1 on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
Can I match a Parker part number?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Adapter O-Ring Boss (ORB) Außengewinde auf JIC Innengewinde 37° Bördel
- fr
- adaptateur O-Ring Boss (ORB) mâle sur JIC femelle cône 37°
- es
- adaptador O-Ring Boss (ORB) macho a JIC hembra cono 37°
- it
- adattatore O-Ring Boss (ORB) maschio a JIC femmina cono 37°
Engineers viewing this also looked at
Stainless Steel ORB Female × NPT Male Connector
Stainless Steel ORB Male × NPT Female Connector
Stainless Steel ORB Male Union
Stainless Steel ORB Hex Head Plug
Stainless Steel ORB Hex Socket Plug
Stainless Steel ORB Male × ORB Female Reducer / Expander
Stainless Steel ORB Female Coupling
