Stainless Steel ORB Male × NPT Female 90° Elbow
Category image · Hoses & FittingsStainless Steel ORB Male × NPT Female 90° Elbow in 316L stainless steel, forged. 7 part numbers, 1/4" to 1"; the size table gives the size on each end and the Parker equivalent for every Indus part number.
Key features
- Body Configuration: 90° elbow
- Port A Thread: SAE O-ring boss (ORB), 1/4" to 1" (7/16-20 to 1-5/16-12)
- Port A Sealing: SAE straight-thread port sealed by an O-ring under the hex
- Nominal Size Range: 1/4" to 1"
- Body Configuration
- 90° elbow
- Port A Thread
- SAE O-ring boss (ORB), 1/4" to 1" (7/16-20 to 1-5/16-12)
- Port A Sealing
- SAE straight-thread port sealed by an O-ring under the hex
Product description
The Stainless Steel ORB Male × NPT Female 90° Elbow is a 90° elbow in 316L stainless steel, forged from one piece. It carries an SAE O-ring boss (ORB) male end and an NPT female end. Stainless steel is chosen where corrosion rules out zinc-plated carbon steel: offshore and marine lines, chemical, fertiliser and petroleum plant, and food, beverage and pharmaceutical process equipment.
Construction
- Body: 90° elbow
- End 1: SAE O-ring boss (ORB) male
- End 2: NPT female
- Material: 316L stainless steel, forged
Ends and sealing
- SAE O-ring boss (ORB): SAE straight-thread port sealed by an O-ring under the hex; SAE J1926 / ISO 11926.
- NPT: taper pipe thread that seals on the thread flanks, with sealant or tape; ASME B1.20.1.
Sizes
7 part numbers, 1/4" to 1". The Sizes & Part Numbers tab lists the size on each end and the Parker equivalent for every one.
- End 1: 1/4" ORB (7/16-20) to 1" ORB (1-5/16-12)
- End 2: 1/8" NPT (1/8-27) to 1" NPT (1-11.5)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
Parker equivalents
For 5 of the 7 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.
Carbon-steel version
The same configuration in zinc-plated carbon steel: Steel ORB Male × NPTF Female 90° Elbow.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end and the material, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 90° elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | SAE O-ring boss (ORB), 1/4" to 1" (7/16-20 to 1-5/16-12) |
| Port A Sealing | SAE straight-thread port sealed by an O-ring under the hex |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPT, 1/8" to 1" (1/8-27 to 1-11.5) |
| Port B Sealing | taper pipe thread that seals on the thread flanks, with sealant or tape |
| Port B Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/4" to 1" |
Construction
| Parameter | Value |
|---|---|
| Material | 316L stainless steel, forged |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J1926, ISO 11926, ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
7 sizesEquivalent to Parker 1/2 AOEG-SS / 1/4 AOEG-SS, Aeroquip 259-206801 and SSP #X#/#GEF / #X#GEF. Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Aeroquip equivalent | SSP equivalent | End 1 | End 2 |
|---|---|---|---|---|---|
| IH-SS-6805-04-02 | — | — | — | 1/4" ORB (7/16-20) | 1/8" NPT (1/8-27) |
| IH-SS-6805-04-04 | 4-1/4 AOEG-SS | 259-206801-4-4 | 4X1/4GEF | 1/4" ORB (7/16-20) | 1/4" NPT (1/4-18) |
| IH-SS-6805-06-04 | — | — | — | 3/8" ORB (9/16-18) | 1/4" NPT (1/4-18) |
| IH-SS-6805-06-06 | 6-3/8 AOEG-SS | 259-206801-6-6 | 6X3/8GEF | 3/8" ORB (9/16-18) | 3/8" NPT (3/8-18) |
| IH-SS-6805-08-08 | 8-1/2 AOEG-SS | 259-206801-8-8 | 8X1/2GEF | 1/2" ORB (3/4-16) | 1/2" NPT (1/2-14) |
| IH-SS-6805-12-12 | 12-3/4 AOEG-SS | 259-206801-12-12 | 12X3/4GEF | 3/4" ORB (1-1/16-12) | 3/4" NPT (3/4-14) |
| IH-SS-6805-16-16 | 16-1 AOEG-SS | 259-206801-16-16 | 16X1GEF | 1" ORB (1-5/16-12) | 1" NPT (1-11.5) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
Can I match a Parker part number?▾
Is there a carbon-steel version?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Adapter 90° Bogen O-Ring Boss (ORB) Außengewinde auf NPT Innengewinde
- fr
- adaptateur coude 90° O-Ring Boss (ORB) mâle sur NPT femelle
- es
- adaptador codo 90° O-Ring Boss (ORB) macho a NPT hembra
- it
- adattatore gomito 90° O-Ring Boss (ORB) maschio a NPT femmina
Engineers viewing this also looked at
Stainless Steel JIC 37° Male × ORB Male Connector
Stainless Steel JIC 37° Male × ORB Male Connector, Long
Stainless Steel ORB Male × NPT Male Connector
Stainless Steel ORB Male × JIC 37° Female Swivel Connector
Stainless Steel ORB Female × NPT Male Connector
Stainless Steel ORB Male × NPT Female Connector
Stainless Steel ORB Male Union
