Skip to content
Specification & standards

DNV type approval for crane and winch gearboxes: what it covers and what it does not

A DNV type approval or an ABS product design assessment on a gearbox saves weeks on a classed crane or winch — if you know what it covers. What type approval, PDA and works recognition mean, what they leave to the project, and which Dinamic Oil drives carry them.

Written by
Ayush Bhatia, Director
Published
Updated
Reading
3 min · 3 sections
Share
Dinamic Oil WD 4803 planetary winch drive with rotating drum flange and brake release line
The WD winch drive sizes on this certificate list each ratio with its approved torque.

At a glance

Key takeaways

  1. A type approval says a design meets the class rules within stated limits; each unit may still need its own product certificate.
  2. Read the conditions: rating basis, design temperature, material certificates and what was not assessed.
  3. An ABS product design assessment (PDA) approves a design; ABS still surveys the unit built for your vessel.
  4. A pinion approval does not cover the slewing ring it meshes with.
  5. Check the expiry date — and the revision — against the date your project will be surveyed.

Figures verified · Certificate numbers, scopes, conditions and expiry dates as published by Dinamic Oil (July 2026 set).

On a vessel, offshore unit or drilling rig built to class, every lifting appliance — deck crane, davit winch, offshore crane hoist — has to satisfy the class society’s rules, and its gearbox is part of that. When the gearbox already carries a type approval for the right rules, the crane builder submits the certificate instead of the full gear calculation. When it does not, the design is reviewed from scratch. Knowing exactly what a certificate covers decides which path a project takes.

/01Three kinds of certificate.

What each certificate means
CertificateIssued forWhat still happens per project
Type approval (DNV)HighlightedA product design, within stated ratings and conditionsProduct certificate for the unit if the rules call for one; installation checked with the appliance
Product design assessment (ABS)A product design, against named ABS rulesUnit survey and certification for the vessel
Works or manufacturer recognition (BV Mode II)The factory’s quality system for a product scopeProduct approval and certification as the rules require

/02Read the conditions.

The value of a type approval is in its annex. Dinamic Oil’s DNV certificate for the WD winch drives, for example, lists each size and ratio with its FEM L2-T5 torque, maximum static torque and a separate SOLAS torque for life-saving appliances, a design temperature of −20 °C, case-hardened gear teeth to ISO 6336, 3.1 material certificates and grade 8.8 bolts or better — and states that bearing life was not evaluated. A crane designer using it still has to show the bearing life for the duty, and still has to work within those torques.

/03Dinamic Oil approvals.

Dinamic Oil class approvals published in 2026
CertificateCoversRulesValid to
DNV TAS00000YSWD 1000 to WD 8000 winch drives (3 stages)DNV-ST-0377, DNV-ST-0378, SOLAS / LSA Code21 Nov 2029
DNV TAS00001JKHighlightedRW 512 to RW 3513 winch drivesDNV-ST-0377, -0378, LSA, DNV-OS-E101 drilling1 Jan 2029
DNV TAS00000NERE 3513 and RE 3513 HRS gearboxDNV-ST-0377, DNV-ST-03785 Mar 2030
DNV TAM000002Y, TAM00000UJPinions for thruster steeringDNV ship and HSLC rules2 Mar 2031, 22 Sep 2030
ABS 22-2218009-1, 25-0346164In-line and right-angle 2/3-stage gearboxes with pinion output (thruster steering)ABS ships, offshore units, high-speed craft7 Feb 2027, 10 Nov 2030
BV Mode IIWorks recognition: gearboxes, winches, orbit motorsBV NR32013 Mar 2030

For any other model, Dinamic Oil can obtain project or product approval from DNV, ABS, Lloyd’s Register, Bureau Veritas and other societies, assessed case by case. Tell us the class society, the rules (shipboard, offshore, drilling, LSA) and the appliance at enquiry stage; it changes which model is the efficient choice.

Common questions

Is a type approval the same as an API 2C monogram?
No. API Spec 2C covers offshore pedestal cranes as a whole. A gearbox type approval is a component approval under a class society’s rules.
What is the SOLAS torque on the certificate?
A separate, lower torque rating for life-saving appliance winches such as lifeboat davits, which have their own design rules.
What happens when a certificate expires?
The maker renews it, often with a new revision. A unit supplied while it was valid keeps its certification; new orders need the current one.
Do approvals cover high ambient temperatures?
Not by default. The certificate states its design temperature; Gulf duty above the standard rating is checked separately.
Where can I get the certificates?
We send the current certificate and its annex with the quotation for any approved model.

Type-approved drives

IndustryOil and gasOffshore and drilling-rig equipment.MarketSupplying Cameroon from DubaiFreight, import documents and lead times for oil and gas operators and contractors in Cameroon.

What next

  1. 01
  2. 02
  3. 03

    Where we supply to this standard

    SAE, EN, DIN and ISO specifications are the common language of this trade precisely because they do not change at a border — 2SC means the same construction in Rotterdam as it does in Ras Al Khaimah. We supply against the standard quoted rather than against a brand, with the layline and the test certificate as the evidence, and ship from Dubai to wherever the drawing was written.

    GCC & Middle East

    South-East Asia

    Western & Northern Europe

    North America & Caribbean

    Everything above ships from the same Dubai warehouse. If your destination is not listed, it is almost certainly still one we quote. See every export destination

Building to class?

Tell us the class society, rules and appliance. We will match an approved Dinamic Oil drive or arrange project approval with the factory.

Plant-down? Call +971 52 2477942 — 24/7

Keep reading

More on Specification & standards

All articles in this topic
Back to Blog