Dixon Push-In Union Elbows

Dixon Push-In Union Elbows in brass: 4 part numbers.
Product description
Dixon Push-In Union Elbows in brass: 4 part numbers.
Specification
- Type: Union
- Material: Brass
- Temperature: -10°F to +200°F
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Dixon part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Feature | Positive Seal: No Leaks, After Tubing Is Inserted, Seal Is Made, Secure Tube Retention: Pulling On Tubing Only Serves To Tighten The Connectono, Full Flow Design Provides Up To 60% More Flow Than Conv |
| Installation | Saves Up To 75% Of Assembly Time Versus The Standard Compression Fittings. Quick Connect: Simply Push Tubing In, No Tools Required. Quick Disconnect: Hold Two Fingers On Insert And Pull Tubing Out, No |
| Min. Temp. | -10°F |
| Min/max Temp. | -10°F, 200°F, N (-23.33°C, 93.33°C)} |
Shipping & lead time
Sizes & part numbers
4 sizes- Dixon Valve & Coupling part no.6516
- Description
- Forged Brass Push-In Union Elbow, 1/2 Inch Tube O.D.
- Dixon Valve & Coupling part no.654
- Description
- Push-In Union Elbow, Forged Brass, 1/8 Inch Tube O.D.
- Dixon Valve & Coupling part no.655
- Description
- Push-In Union Elbow, Forged Brass, 5/32 Inch Tube O.D.
- Dixon Valve & Coupling part no.658
- Description
- Push-In Union Elbow, Forged Brass, 1/4 Inch Tube O.D.
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What is the Dixon Push-In Union Elbows used for?▾
How do I read part numbers such as 6516 on the Dixon Push-In Union Elbows?▾
What tube and thread sizes do the Dixon Push-In Union Elbows come in?▾
What pressure and temperature are the Dixon Push-In Union Elbows rated for?▾
What are the Dixon Push-In Union Elbows made of?▾
Which standards and documents apply to the Dixon Push-In Union Elbows?▾
What tube and port do the Dixon Push-In Union Elbows connect to?▾
How do I connect and remove tube on the Dixon Push-In Union Elbows?▾
Where are the Dixon Push-In Union Elbows used?▾
How do the Dixon Push-In Union Elbows differ from the Dixon Push-In Unions?▾
Where are the Dixon Push-In Union Elbows made and how do they ship from Dubai?▾
Do you stock the Dixon Push-In Union Elbows in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Verschraubung
- fr
- union
- es
- unión
- it
- giunto
From the blog
Written about this range
Pneumatics & compressed air
Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder
A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.
12 min read
Buying fittings & adapters
Push-to-connect air fittings: how they grip and seal, ratings, tube, and the mistakes that make them leak
A push-to-connect fitting does two jobs with two parts: stainless teeth grip the tube, an O-ring seals it. Push the tube only past the teeth and it holds — and leaks. Straight, elbow, tee, Y, bulkhead and banjo fittings for plastic air tube: how they work, ratings (ours 0–150 psi, vacuum to −29.5 inHg, 32–140 °F), the tube they need, ISO 14743, and why they never belong on hydraulic or air-brake lines.
4 min read
Pneumatics & compressed air
Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared
Nylon holds pressure, polyurethane bends, polyolefin stays clean and fluoropolymer takes heat and chemicals — and every one of them loses pressure rating as it warms. How the four families compare on SMC’s own data, how far ratings fall with temperature, minimum bend radius, why inch and metric tube are not interchangeable, and when to specify flame-resistant, antistatic or clean-room tubing.
12 min read








