Skip to content
DIXON VALVE & COUPLINGIH-DIX-PLUG-IN-ELBOWS· MADE IN UNITED STATES

Dixon Plug-In Elbows

Push-to-Connect Pneumatic FittingsEx-stock · delivery in 3 days
Dixon Plug-In Elbows, range photo
VIEW 01·Dixon Plug-In Elbows, range photo
1 / 3

Dixon Plug-In Elbows in nylon, plastic, 1/4" to 1/2": 7 part numbers.

Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Dixon Plug-In Elbows in nylon, plastic, 1/4" to 1/2": 7 part numbers.

Specification

  • Type: Plug In Elbow
  • Material: Nylon, Plastic
  • Size range: 1/4" to 1/2"
  • Seal Material: EPDM
  • Part numbers: 7

Sizes and part numbers

The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.

Hose and fitting match

A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.

How to order

Quote the Dixon part number. Price and lead time are confirmed with the quotation.

Specifications

ParameterValue
ApplicationSuitable For Water, Potable Liquids And Neutral Gas Applications, Including Water Filtration, Water Coolers, Coffee Machines And Beverage Dispensers
ConstructionFDA Compliant, NSF-51 Listed For Contact With Food, NSF-61 List C-Hot Rated, Meets California And Vermont <0.25% Lead Requirements
Seal MaterialEPDM

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in United States

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

Also known as

The same part, in the designations used across European and Gulf trade catalogues.

de
Verschlussstopfen
fr
bouchon mâle
es
tapón macho
it
tappo

From the blog

Written about this range

Pneumatics & compressed air

Push-to-connect fittings and exhaust silencers: how they grip, seal, release and slow a cylinder

A push-in fitting grips the tube with a toothed collet and seals on its outside diameter with an O-ring — so the tube cut, the tube size and the thread end decide whether it holds. How push-in fittings work, fitting and releasing tube, pressure and temperature limits by maker, NPT vs BSPT vs BSPP, and how sintered bronze, plastic and speed-control mufflers affect exhaust back-pressure and cylinder speed.

12 min read

Buying fittings & adapters

Push-to-connect air fittings: how they grip and seal, ratings, tube, and the mistakes that make them leak

A push-to-connect fitting does two jobs with two parts: stainless teeth grip the tube, an O-ring seals it. Push the tube only past the teeth and it holds — and leaks. Straight, elbow, tee, Y, bulkhead and banjo fittings for plastic air tube: how they work, ratings (ours 0–150 psi, vacuum to −29.5 inHg, 32–140 °F), the tube they need, ISO 14743, and why they never belong on hydraulic or air-brake lines.

4 min read

Pneumatics & compressed air

Pneumatic tubing materials: nylon, polyurethane, polyolefin and fluoropolymer compared

Nylon holds pressure, polyurethane bends, polyolefin stays clean and fluoropolymer takes heat and chemicals — and every one of them loses pressure rating as it warms. How the four families compare on SMC’s own data, how far ratings fall with temperature, minimum bend radius, why inch and metric tube are not interchangeable, and when to specify flame-resistant, antistatic or clean-room tubing.

12 min read

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at