The Burner/Flare Boom Hose is a Well Service / Intervention Hose from the Continental ContiTech oil & gas hose range. Burner / flare-boom hose for offshore well test flowback to flare boom. Heat-resistant liner withstands hot produced fluids.
Construction
- Application: Well Service / Intervention Hose
- Liner: Heat-resistant FKM / HNBR
- Reinforcement: Multiple high-tensile steel cable plies + heat-shielding
- Coupling: flanged
- Service type: high-temperature
Performance
- Pressure rating: 5000 psi WP (well test flare line)
- Inner diameter range: 2" to 6"
- Operating temperature: -30°C to +200°C (high-temp produced fluids)
Application context
Well service / intervention hoses cover well-test flowback, well stimulation (acidizing), hydraulic fracturing (frac hoses), and burner / flare-boom service. Pressure ratings up to 15000 psi. Acid-resistant fluoropolymer or specialty rubber liners; abrasion-resistant outer covers for frac service.
Applicable standards
How to order
Specify (a) the inner diameter, (b) the assembly length, (c) end-fitting flange spec (API 6A flange code, raised-face / ring-joint), and (d) any special service requirements (sour service, sub-zero / Arctic, fire-resistant cover). Indus engineering will confirm the assembly drawing on the RFQ — pressure-test certificates accompany every assembly.
Companion products
Pair with API 6A flanges, swivel joints, and the appropriate manifold valves. Indus is an authorised distributor for the Continental ContiTech and Manuli oil & gas hose ranges.