The Hydraulic Conduit Hose is a Well Control Hose (API 16C) from the Continental ContiTech oil & gas hose range. Subsea hydraulic conduit hose for transmitting control fluid in subsea umbilicals to BOPs / Christmas trees. API 17J.
Construction
- Application: Well Control Hose (API 16C)
- Liner: Hydraulic-fluid-compatible synthetic rubber
- Reinforcement: Wire braid
- Coupling: crimped
- Service type: subsea
Performance
- Pressure rating: 5000 psi WP
- Inner diameter range: 1/4" to 1"
- Operating temperature: -30°C to +100°C
Application context
Well control hoses operate during BOP-stack well kicks — circulating kill mud and routing flowback through the choke manifold. API Specification 16C governs choke & kill lines (10000 psi WP, 15000 psi MBP). API 16D governs BOP control hoses (fire-resistant per ISO 15540). Subsea variants comply with API 17J.
Applicable standards
How to order
Specify (a) the inner diameter, (b) the assembly length, (c) end-fitting flange spec (API 6A flange code, raised-face / ring-joint), and (d) any special service requirements (sour service, sub-zero / Arctic, fire-resistant cover). Indus engineering will confirm the assembly drawing on the RFQ — pressure-test certificates accompany every assembly.
Companion products
Pair with API 6A flanges, swivel joints, and the appropriate manifold valves. Indus is an authorised distributor for the Continental ContiTech and Manuli oil & gas hose ranges.