The Hydraulic tensioner & compensator hose assemblies is a Tensioner & Compensator Hose from the Continental ContiTech oil & gas hose range. Hydraulic tensioner & compensator hose assemblies — full-assembly delivery (hose + flanged ends + pressure test certificate) for offshore tensioner systems.
Construction
- Application: Tensioner & Compensator Hose
- Liner: Hydraulic-fluid-compatible synthetic rubber
- Reinforcement: Multiple high-tensile steel cable plies
- Coupling: flanged
- Service type: offshore
Performance
- Pressure rating: 5000 psi WP, 12500 psi MBP
- Inner diameter range: 1" to 4"
- Operating temperature: -30°C to +82°C
Application context
Tensioner / compensator hoses run between the surface tensioner skid and the marine riser (riser tensioner) or between the heave compensator and the drill string (drill string compensator). They see millions of high-frequency flex cycles — fatigue-rated steel-cable reinforcement is mandatory. API 17J / API 7K cross-reference.
Applicable standards
How to order
Specify (a) the inner diameter, (b) the assembly length, (c) end-fitting flange spec (API 6A flange code, raised-face / ring-joint), and (d) any special service requirements (sour service, sub-zero / Arctic, fire-resistant cover). Indus engineering will confirm the assembly drawing on the RFQ — pressure-test certificates accompany every assembly.
Companion products
Pair with API 6A flanges, swivel joints, and the appropriate manifold valves. Indus is an authorised distributor for the Continental ContiTech and Manuli oil & gas hose ranges.