Frac hose assemblies

Frac hose assemblies for high-pressure hydraulic fracturing service — proppant + abrasive frac fluid up to 15000 psi.
Key features
- Application Family: well-service
- Pressure Rating: 15000 psi WP (frac service)
- Inner Diameter Range: 3" to 5"
- Operating Temperature: -30°C to +100°C
- Service Type: frac
- Application Family
- well-service
- Pressure Rating
- 15000 psi WP (frac service)
- Inner Diameter Range
- 3" to 5"
- Operating Temperature
- -30°C to +100°C
- Service Type
- frac
Product description
The Frac hose assemblies is a Well Service / Intervention Hose from the Continental ContiTech oil & gas hose range. Frac hose assemblies for high-pressure hydraulic fracturing service — proppant + abrasive frac fluid up to 15000 psi.
Construction
- Application: Well Service / Intervention Hose
- Liner: Abrasion-resistant rubber
- Reinforcement: Multiple high-tensile steel cable plies — frac-rated
- Coupling: flanged
- Service type: frac
Performance
- Pressure rating: 15000 psi WP (frac service)
- Inner diameter range: 3" to 5"
- Operating temperature: -30°C to +100°C
Application context
Well service / intervention hoses cover well-test flowback, well stimulation (acidizing), hydraulic fracturing (frac hoses), and burner / flare-boom service. Pressure ratings up to 15000 psi. Acid-resistant fluoropolymer or specialty rubber liners; abrasion-resistant outer covers for frac service.
Applicable standards
- API 7K
- API 16C (cross-reference)
How to order
Specify (a) the inner diameter, (b) the assembly length, (c) end-fitting flange spec (API 6A flange code, raised-face / ring-joint), and (d) any special service requirements (sour service, sub-zero / Arctic, fire-resistant cover). Indus engineering will confirm the assembly drawing on the RFQ — pressure-test certificates accompany every assembly.
Companion products
Pair with API 6A flanges, swivel joints, and the appropriate manifold valves. Indus is an authorised distributor for the Continental ContiTech and Manuli oil & gas hose ranges.
Identification
| Parameter | Value |
|---|---|
| Application Family | well-service |
Performance
| Parameter | Value |
|---|---|
| Pressure Rating | 15000 psi WP (frac service) |
| Operating Temperature | -30°C to +100°C |
Dimensions
| Parameter | Value |
|---|---|
| Inner Diameter Range | 3" to 5" |
Construction
| Parameter | Value |
|---|---|
| Liner Material | Abrasion-resistant rubber |
| Reinforcement | Multiple high-tensile steel cable plies — frac-rated |
| Coupling Type | flanged |
Service
| Parameter | Value |
|---|---|
| Service Type | frac |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | API 7K, API 16C (cross-reference) |
Shipping & lead time
What is the Frac hose assemblies used for?▾
What does the 15000 psi WP (frac service) rating of the Frac hose assemblies mean?▾
What bore sizes does the Frac hose assemblies come in?▾
Should I choose the Frac hose assemblies or the Offshore Well Stimulation / Intervention / Acidizing Hose?▾
What is the temperature range of the Frac hose assemblies?▾
What are the liner and reinforcement of the Frac hose assemblies?▾
Which API standard does the Frac hose assemblies meet, and is it API monogrammed?▾
What end fittings does the Frac hose assemblies use?▾
How should I inspect and replace the Frac hose assemblies?▾
How does the Frac hose assemblies compare with the Offshore Well Stimulation / Intervention / Acidizing Hose?▾
Where is the Frac hose assemblies made and can it be exported from Dubai?▾
Do you keep the Frac hose assemblies in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Oilfield & pressure control
Well service and stimulation hose: frac, acidizing, well test and flare boom lines
Stimulation and frac lines run at 15,000 psi, well test lines carry sour produced fluid, and flare boom hose sees 200 °C. What each well service hose is built from, and why the liner is the decision.
4 min read
Oilfield & pressure control
Oilfield hose: API 7K, 16C, 16D and 17J, and which hose each one governs
Rotary and vibrator, choke and kill, BOP control, subsea, stimulation, frac and low-pressure rig hose. Which API standard governs each, the pressures and temperatures on our listings, and the documents that must travel with them.
7 min read




