Skip to content

NPT Adapters

102 SKUs8 brands

Showing 49–96 of 102 SKUs

Steel NPTF male 45° elbow, zinc-plated steel, top view

Steel NPTF Male 45° Elbow

Indus HydraulicsNPTF (Dryseal), 1/8" to 1-1/2" (1/8-27 to 1-1/2-11.5)Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Inquire
NPT male tee, tapered male thread on three ends, forged steel

Male Tee NPT

Indus Hydraulicsup to 350 bar (5000 psi)NPT 1/8" to 2"
Inquire
Fixed female connector, NPT female both ends, zinc-plated steel hex body

Fixed Female Connector NPT

Indus HydraulicsNPT 1/8" to 2"npt-taper
Inquire
NPT female cross, four-way forged steel body

Female Cross NPT

Indus HydraulicscrossNPT 1/8" to 2"
Inquire
Category image · Hoses & Fittings

Steel NPTF Female × NPSM Male Swivel 90° Elbow

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadNPTF (Dryseal), 1/4" to 3/4" (1/4-18 to 3/4-14)
Inquire
NPT cap, zinc-plated steel hex cap with female tapered thread

Cap NPT

Indus Hydraulicsup to 350 bar (5000 psi)NPT taper 1/8" to 2"
Inquire
90° elbow, fixed NPT female both ends, zinc-plated forged steel

90° Elbow Fixed Female NPT

Indus HydraulicsNPT taper 1/8" to 2"NPT 1/8" to 2"
Inquire
NPT 90° elbow connector, male tapered thread both ends, forged steel

90° Elbow Connector NPT

Indus Hydraulics90-elbownpt-taper
Inquire
Category image · Hoses & Fittings
Category image · Hoses & Fittings
Steel NPTF female × NPSM female swivel 90° elbow, zinc-plated steel, top view

Steel NPTF Female × NPSM Female Swivel 90° Elbow

Indus HydraulicsNPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)90° elbow
Inquire
Category image · Hoses & Fittings
Category image · Hoses & Fittings
Steel NPTF female × NPSM female swivel 45° elbow, zinc-plated steel, top view

Steel NPTF Female × NPSM Female Swivel 45° Elbow

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadNPTF (Dryseal), 1/8" to 1-1/2" (1/8-27 to 1-1/2-11.5)
Inquire
Category image · Hoses & Fittings
Steel NPTF female tee, zinc-plated steel, top view

Steel NPTF Female Tee

Indus HydraulicsNPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Inquire
Category image · Hoses & Fittings
Dimension drawing of the steel NPTF female 45° elbow, lettered for the size table

Steel NPTF Female 45° Elbow

Indus Hydraulics45° elbowNPTF (Dryseal), 1/8" to 1-1/4" (1/8-27 to 1-1/4-11.5)
Inquire
Steel NPTF 45° street elbow, zinc-plated steel, top view

Steel NPTF 45° Street Elbow

Indus Hydraulics45° street elbowNPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
Inquire
Steel NPT seamless pipe nipple, angled view

Steel NPT Seamless Pipe Nipple

Indus HydraulicsNPT, 1/8" to 1-1/4" (1/8-27 to 1-1/4-11.5)pipe nipple
Inquire
Steel NPSM female swivel × NPTF female branch tee, zinc-plated steel, top view

Steel NPSM Female Swivel × NPTF Female Branch Tee

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadbranch tee
Inquire
Steel NPSM female swivel union tee, zinc-plated steel, top view

Steel NPSM Female Swivel Union Tee

Indus Hydraulicsstraight pipe thread that does not seal on the thread; a swivel seals on its 30° seatNPSM, 1/8" to 1-1/4" (1/8-27 to 1-1/4-11.5)
Inquire
Category image · Hoses & Fittings
Category image · Hoses & Fittings
Category image · Hoses & Fittings

Questions we get asked

About this range

01Why does an NPT joint limit an assembly’s pressure?
A taper thread is rated below many hose and fitting forms, and the rating falls as the size rises. A hose assembly with an NPT end is rated no higher than that end.
02Can NPT be re-tightened to stop a leak?
A little, but a taper that has been over-tightened or remade several times can split a female port. If a correctly sealed joint still leaks, remake it with fresh sealant rather than adding torque.
03What types of NPT adapter are available?
The range includes NPTF tees, male × female NPT 90° elbows, NPTF female × NPSM female swivel 45° and 90° elbows, and hollow hex and square head pipe plugs. They are made to ASME B1.20.1.
04What sizes do NPT adapters come in?
NPTF (Dryseal) adapters such as the tee run from 1/8" to 2" (1/8-27 to 2-11.5). The size table on this page lists each adapter's thread and size, and Indus supplies the range from Dubai.
05Can NPT and BSPT threads be mixed?
No. NPT has a 60° thread angle and is not interchangeable with 55° BSPT. In hydraulic service the taper is sealed with PTFE tape or an anaerobic sealant.