Steel NPTF 45° Street Elbow, forged carbon steel, trivalent zinc plated. 9 part numbers, 1/8" to 2"; the size table gives the size on each end and the Parker equivalent for every Indus part number.
Key features
- Body Configuration: 45° street elbow
- Port A Thread: NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
- Port A Sealing: Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
- Nominal Size Range: 1/8" to 2"
- Max Working Pressure: Up to 11,000 psi, falling with size (ASME B31.3 (NPT), manufacturer); see the table
- Body Configuration
- 45° street elbow
- Port A Thread
- NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
- Port A Sealing
- Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Product description
The Steel NPTF 45° Street Elbow is a 45° street elbow, in forged carbon steel, trivalent zinc plated. Its ends are NPTF (Dryseal) male and NPTF (Dryseal) female. NPTF and NPSM pipe adapters join pipe-threaded ports and swivel ends on hydraulic, pneumatic and lubrication lines.
Construction
- Body: 45° street elbow
- End 1: NPTF (Dryseal) male
- End 2: NPTF (Dryseal) female
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- NPTF (Dryseal): Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread; ASME B1.20.3.
Sizes
9 part numbers, 1/8" to 2". The Sizes & Part Numbers tab lists the size on each end and the Parker equivalent for every one.
- End 1: NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
- End 2: NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
Pressure rating
Manufacturer's published ratings (ASME B31.3 (NPT)), from 3,900 to 11,000 psi depending on size:
| Size designator | NPT size | Male (psig) | Male (bar) | Female (psig) | Female (bar) |
|---|---|---|---|---|---|
| 1 | 1/16 | 11000 | 757 | 6700 | 461 |
| 2 | 1/8 | 10000 | 689 | 6500 | 447 |
| 4 | 1/4 | 8000 | 551 | 6600 | 454 |
| 6 | 3/8 | 7800 | 537 | 5300 | 365 |
| 8 | 1/2 | 7700 | 530 | 4900 | 337 |
| 12 | 3/4 | 7300 | 502 | 4600 | 316 |
| 16 | 1 | 5300 | 365 | 4400 | 303 |
| 20 | 1 1/4 | 6000 | 413 | 5000 | 344 |
| 24 | 1 1/2 | 5000 | 344 | 4600 | 316 |
| 32 | 2 | 3900 | 268 | 3900 | 268 |
Parker equivalents
For 9 of the 9 sizes the size table gives the Parker part number the manufacturer cross-references, so a part number taken off existing equipment can be matched to the Indus part number.
Stainless-steel version
The same configuration in 316 stainless steel: Stainless Steel NPT 45° Street Elbow.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 45° street elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5) |
| Port A Sealing | Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread |
| Port A Gender | male |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5) |
| Port B Sealing | Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread |
| Port B Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | Up to 11,000 psi, falling with size (ASME B31.3 (NPT), manufacturer); see the table |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.3 |
Shipping & lead time
Sizes & part numbers
9 sizesEquivalent to Parker 1/2 CD45 / 1/4 CD45, Aeroquip 2088 and SSP 1/#MF / #MF (SAE 140339). Every size below prints its equivalent part number beside ours — quote either.
| Indus part no. | Parker equivalent | Aeroquip equivalent | SSP equivalent | SAE no. | End 1 | End 2 |
|---|---|---|---|---|---|---|
| IH-ST-5503-02-02 | 1/8 CD45 | 2088-2-2 | 1/8MF-45 | 140339 | 1/8" NPTF (1/8-27) | 1/8" NPTF (1/8-27) |
| IH-ST-5503-04-04 | 1/4 CD45 | 2088-4-4 | 1/4MF-45 | 140339 | 1/4" NPTF (1/4-18) | 1/4" NPTF (1/4-18) |
| IH-ST-5503-06-06 | 3/8 CD45 | 2088-6-6 | 3/8MF-45 | 140339 | 3/8" NPTF (3/8-18) | 3/8" NPTF (3/8-18) |
| IH-ST-5503-08-08 | 1/2 CD45 | 2088-8-8 | 1/2MF-45 | 140339 | 1/2" NPTF (1/2-14) | 1/2" NPTF (1/2-14) |
| IH-ST-5503-12-12 | 3/4 CD45 | 2088-12-12 | 3/4MF-45 | 140339 | 3/4" NPTF (3/4-14) | 3/4" NPTF (3/4-14) |
| IH-ST-5503-16-16 | 1 CD45 | 2088-16-16 | 1MF-45 | 140339 | 1" NPTF (1-11.5) | 1" NPTF (1-11.5) |
| IH-ST-5503-20-20 | 1 1/4 CD45 | 2088-20-20 | 1-1/4MF-45 | 140339 | 1-1/4" NPTF (1-1/4-11.5) | 1-1/4" NPTF (1-1/4-11.5) |
| IH-ST-5503-24-24 | 1 1/2 CD45 | 2088-24-24 | 1-1/2MF-45 | 140339 | 1-1/2" NPTF (1-1/2-11.5) | 1-1/2" NPTF (1-1/2-11.5) |
| IH-ST-5503-32-32 | 2 CD45 | 2088-32-32 | 2MF-45 | 140339 | 2" NPTF (2-11.5) | 2" NPTF (2-11.5) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Aeroquip, Parker or SSP. Aeroquip, Parker or SSP part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
Can I match a Parker part number?▾
Is there a stainless-steel version?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
From the blog
Written about this range
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read
Thread & fitting identification
NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss
Five American hose-end families that get confused because they share inch sizes. Which seals on the thread, which on a cone, which on an O-ring — and how to tell NPT from NPSM before it leaks.
4 min read
Engineers viewing this also looked at
Steel NPTF Female 45° Elbow
Steel NPTF Male × NPTF Female Branch Tee
Steel NPTF Male × NPTF Female Run Tee
Steel NPTF Female Tee
Steel NPTF Male × NPTF Female Cross
Steel NPTF Male × NPSM Male Swivel 90° Elbow
Steel NPTF Female × NPSM Male Swivel 90° Elbow
