Brennan C2650 BT-BT-BT-BT Cross Tube Adapters
Category image · Hoses & FittingsBrennan C2650 BT-BT-BT-BT Cross Tube Adapters: 3 part numbers.
Product description
Brennan C2650 BT-BT-BT-BT Cross Tube Adapters: 3 part numbers.
Specification
- Type: Cross
- Part numbers: 3
Sizes and part numbers
The Sizes & Part Numbers tab lists every Brennan part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Thread identification
Adapters only seal when both ends match the port they go into. JIC 37° and SAE 45° flares, NPT and BSPT tapers, and ORB, BSPP and metric parallel threads can look alike; quote the part number, or measure the thread and tell us the seat, and we will confirm the end types before supply.
How to order
Quote the Brennan part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
3 sizes- Brennan part no.c2650-04-04-04-04-ss
- Description
- Brennan C2650-04-04-04-04-SS
- Brennan part no.C2650-08-08-08-08-SS
- Description
- Cross Adapter, Bite Type, SS, 1/2 Inch Tube O.D
- Brennan part no.c2650-12-12-12-12-fg
- Description
- Brennan C2650-12-12-12-12-FG
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What are the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters used for?▾
What is the part number for Brennan C2650-04-04-04-04-SS in the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters?▾
What sizes and part numbers do the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters come in?▾
How do I choose the right Brennan C2650 BT-BT-BT-BT Cross Tube Adapters for my port threads?▾
What is the working pressure of the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters?▾
What are the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters made from, and is it suitable for my fluid?▾
Which standards do the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters conform to, and can I get test certificates?▾
What mates with the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters, and which fittings do I pair them with?▾
How do the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters seal, and what should I check when fitting them?▾
How do the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters differ from the Brennan 1404 Straight MP-FPS Tube Adapters?▾
Where are the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters made, and can you export them from Dubai?▾
Do you stock the Brennan C2650 BT-BT-BT-BT Cross Tube Adapters in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Kreuzstück
- fr
- croix
- es
- cruz
- it
- croce
From the blog
Written about this range
Buying fittings & adapters
NPT and NPSM hydraulic adapters: NPTF Dryseal, the 30° swivel seat, ratings — and weld-on adapters
NPT is the one hydraulic thread that seals on the thread, and Parker lists its limits plainly: poor dynamic sealing, ports that can crack, limited remakeability. Yet every pump, filter and gauge on an American machine has one. The steel NPT and NPSM range — nipples, elbows, tees, swivels, plugs and caps — with ratings by size (male and female differ), why an NPSM swivel needs a 30° seat, and the weld-on adapters that put a port on plate.
6 min read
Failure analysis
Using sealant on hydraulic threads: which joints want it, and which are ruined by it
Tape on a tapered thread is correct. Tape on a cone, a flat face or an O-ring boss is how a good joint is made to leak — and how debris gets into the system.
3 min read
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read








