
Female Cross NPT — NPT family cross for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Key features
- Body Configuration: cross
- Port A Thread: NPT taper 1/8" to 2"
- Port A Sealing: npt-taper
- Nominal Size Range: NPT 1/8" to 2"
- Max Working Pressure: up to 350 bar (5000 psi)
- Body Configuration
- cross
- Port A Thread
- NPT taper 1/8" to 2"
- Port A Sealing
- npt-taper
- Nominal Size Range
- NPT 1/8" to 2"
- Max Working Pressure
- up to 350 bar (5000 psi)
Product description
The Female Cross NPT is a Cross hydraulic adapter in the NPT family. Female Cross NPT — NPT family cross for hydraulic line interconnection. RFQ-only; standard Indus zinc-plated carbon-steel construction.
Construction
- Body configuration: Cross
- Port A: Male — NPT taper 1/8" to 2" (NPT taper thread (self-sealing))
- Additional ports: Four ports total — all identical to Port A unless title indicates otherwise.
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
up to 350 bar (5000 psi). NPT family — ASME B1.20.1 — National Pipe Taper. 60° thread angle (NOT interchangeable with BSPT 55°). PTFE tape or anaerobic sealant required for hydraulic service.
Applicable Standards
- ASME B1.20.1
How to order
Specify (a) the host port size and thread spec on each end, (b) any special seal requirements (bonded seal vs ED seal vs cone seat), and (c) whether you need stainless-steel construction or non-standard surface treatment. Indus engineering will confirm the correct part number against your equipment.
Companion products
Pair with the appropriate Indus tubing or hose ends. For tube assemblies use Indus DIN 2353 cutting rings and end nuts. For hose assemblies pair with Indus crimp ferrules and the matching hose grade.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | cross |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | NPT taper 1/8" to 2" |
| Port A Sealing | npt-taper |
| Port A Gender | male |
Port C
| Parameter | Value |
|---|---|
| Additional Ports | Four ports total — all identical to Port A unless title indicates otherwise. |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | NPT 1/8" to 2" |
Performance
| Parameter | Value |
|---|---|
| Max Working Pressure | up to 350 bar (5000 psi) |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.1 |
Shipping & lead time
Sizes & part numbers
9 sizes- Indus part no.IH-ST-5652-02-02-02-02
- Tompkins equivalent
- 5652-02-02-02-02
- End 1
- 1/8" NPTF female (1/8-27)
- End 2
- 1/8" NPTF female (1/8-27)
- End 3
- 1/8" NPTF female (1/8-27)
- Indus part no.IH-ST-5652-04-04-04-04
- Tompkins equivalent
- 5652-04-04-04-04
- End 1
- 1/4" NPTF female (1/4-18)
- End 2
- 1/4" NPTF female (1/4-18)
- End 3
- 1/4" NPTF female (1/4-18)
- Indus part no.IH-ST-5652-06-06-06-06
- Tompkins equivalent
- 5652-06-06-06-06
- End 1
- 3/8" NPTF female (3/8-18)
- End 2
- 3/8" NPTF female (3/8-18)
- End 3
- 3/8" NPTF female (3/8-18)
- Indus part no.IH-ST-5652-08-08-08-08
- Tompkins equivalent
- 5652-08-08-08-08
- End 1
- 1/2" NPTF female (1/2-14)
- End 2
- 1/2" NPTF female (1/2-14)
- End 3
- 1/2" NPTF female (1/2-14)
- Indus part no.IH-ST-5652-12-12-12-12
- Tompkins equivalent
- 5652-12-12-12-12
- End 1
- 3/4" NPTF female (3/4-14)
- End 2
- 3/4" NPTF female (3/4-14)
- End 3
- 3/4" NPTF female (3/4-14)
- Indus part no.IH-ST-5652-16-16-16-16
- Tompkins equivalent
- 5652-16-16-16-16
- End 1
- 1" NPTF female (1-11.5)
- End 2
- 1" NPTF female (1-11.5)
- End 3
- 1" NPTF female (1-11.5)
- Indus part no.IH-ST-5652-20-20-20-20
- Tompkins equivalent
- 5652-20-20-20-20
- End 1
- 1-1/4" NPTF female (1-1/4-11.5)
- End 2
- 1-1/4" NPTF female (1-1/4-11.5)
- End 3
- 1-1/4" NPTF female (1-1/4-11.5)
- Indus part no.IH-ST-5652-24-24-24-24
- Tompkins equivalent
- 5652-24-24-24-24
- End 1
- 1-1/2" NPTF female (1-1/2-11.5)
- End 2
- 1-1/2" NPTF female (1-1/2-11.5)
- End 3
- 1-1/2" NPTF female (1-1/2-11.5)
Show all 9 sizesShow fewer sizes
- Indus part no.IH-ST-5652-32-32-32-32
- Tompkins equivalent
- 5652-32-32-32-32
- End 1
- 2" NPTF female (2-11.5)
- End 2
- 2" NPTF female (2-11.5)
- End 3
- 2" NPTF female (2-11.5)
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 3 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
Indus Hydraulics is not affiliated with Tompkins. Tompkins part numbers are shown for cross-reference only, so you can order from an existing bill of materials.
What is the Female Cross NPT used for and which ports does it connect?▾
What is the part number for 1/8" NPTF female (1/8-27) on every port in the Female Cross NPT?▾
What sizes and part numbers does the Female Cross NPT come in?▾
How do I choose the right Female Cross NPT for my port threads?▾
What is the working pressure of the Female Cross NPT?▾
What is the Female Cross NPT made from, and is it suitable for my fluid?▾
Which standards does the Female Cross NPT conform to, and can I get test certificates?▾
What mates with the Female Cross NPT, and which fittings do I pair it with?▾
How does the Female Cross NPT seal, and what should I check when fitting it?▾
What is the Tompkins equivalent of the Female Cross NPT?▾
Where is the Female Cross NPT made, and can you export it from Dubai?▾
Do you stock the Female Cross NPT in Dubai, and how do I get a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- NPT Außengewinde Kreuzstück
- fr
- mâle NPT croix
- es
- macho NPT cruz
- it
- maschio NPT croce
From the blog
Written about this part
Specification & standards
Stopping an NPT leak: tape, sealant, or neither
A tapered thread seals on the thread itself, which is why it needs help. Every other connector on the machine seals somewhere else, which is why putting tape on it makes the leak worse.
6 min read
Failure analysis
Cross-threaded or stripped port: repair it, insert it, or replace the block
What is recoverable depends on something most people never think about: whether that port seals on the thread or somewhere else. Get that question right and the decision makes itself.
5 min read
Machine down
Removing a seized hose or fitting without destroying the port
The hose is scrap either way. The manifold behind it is not, and almost every expensive outcome here comes from a decision made in the first five minutes.
5 min read








