Category
Stainless Steel Sanitary Fittings & Tubing
Sanitary clamp and weld fittings in 304 and 316 stainless steel, for food, beverage and pharmaceutical lines.
Clamp or weld
Clamp-end fittings come apart for cleaning and inspection with a clamp and gasket; weld-end fittings are welded into the tube run for a permanent, crevice-free joint. Sizes are the tube outside diameter.
ASTM A269/A270 and 3-A
The manufacturer states its sanitary fittings and tubing conform to ASTM A269/A270 and 3-A, and supplies a material test report.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Stainless Steel Sanitary Fittings & Tubing across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- Southern Africa
- South Africa, Zambia, Zimbabwe
- North Africa
- Egypt, Mauritania, Morocco
304 Stainless Steel Sanitary Clamp × NPT Female Adapter
Category image · Hoses & Fittings304 Stainless Steel Sanitary Clamp-End Eccentric Reducer
304 Stainless Steel Sanitary Bevel-Seat Hex Nut
304 Stainless Steel Sanitary Clamp-End 90° Elbow
304 Stainless Steel Sanitary Clamp-End 45° Elbow
Questions we get asked
About this range
- 01304 or 316?
- 316 adds molybdenum and resists chlorides, so it suits seawater, brine and many chemicals; 304 suits fresh water, air and food service. Every fitting is listed in both grades where the manufacturer makes both.