45° SAE Female 45° Cone Hose Fitting

45° elbow hose fitting with SAE female-swivel 45° cone — moderate-angle routing on refrigerant or hydraulic lines. 45 elbow, UN/UNF (7/16-20 to 1-1/16-14), 45° cone seat (SAE J512).
Key features
- Fitting Configuration: 45-elbow
- Thread Form: UN/UNF (7/16-20 to 1-1/16-14)
- Sealing Form: 45° cone seat (SAE J512)
- Nominal Size Range: -04 to -12
- Fitting Configuration
- 45-elbow
- Thread Form
- UN/UNF (7/16-20 to 1-1/16-14)
- Sealing Form
- 45° cone seat (SAE J512)
- Nominal Size Range
- -04 to -12
Product description
The 45° SAE Female 45° Cone Hose Fitting is a 45 elbow hydraulic hose fitting in the SAE 45° Flare family — female-swivel thread with 45° cone seat (SAE J512) sealing form. Compliant with SAE J512.
Construction
- Configuration: 45-elbow
- Thread form: UN/UNF (7/16-20 to 1-1/16-14)
- Sealing form: 45° cone seat (SAE J512)
- Gender: female-swivel
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated, Cr3+ passivated, RoHS-compliant
Performance
Pressure rating matches the matching ferrule and host hose grade — see Indus Crimp Ferrules for compatibility tables. Operating temperature -40°C to +120°C; refer to fluid compatibility chart for aggressive media.
Applicable Standards
- SAE J512
How to order
Specify (a) the host hose grade and bore size, (b) the matching crimp ferrule, and (c) the thread size. Indus crimps and pressure-tests the assembly before dispatch.
Companion products
Pair with Indus crimp ferrules from the matching hose grade. Browse the Hose Fittings sub-section under Hoses & Fittings for other thread families.
Identification
| Parameter | Value |
|---|---|
| Fitting Configuration | 45-elbow |
| Thread Form | UN/UNF (7/16-20 to 1-1/16-14) |
| Sealing Form | 45° cone seat (SAE J512) |
| Thread Gender | female-swivel |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | -04 to -12 |
Construction
| Parameter | Value |
|---|---|
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J512 |
Shipping & lead time
What is the 45° SAE Female 45° Cone Hose Fitting used for?▾
What should I send to order the 45° SAE Female 45° Cone Hose Fitting?▾
What sizes does the 45° SAE Female 45° Cone Hose Fitting come in?▾
What pressure rating does the 45° SAE Female 45° Cone Hose Fitting have?▾
What material and finish does the 45° SAE Female 45° Cone Hose Fitting have?▾
Which standard does the 45° SAE Female 45° Cone Hose Fitting follow?▾
What does the 45° SAE Female 45° Cone Hose Fitting connect to?▾
How do I fit the 45° SAE Female 45° Cone Hose Fitting so it seals?▾
Where is the 45° SAE Female 45° Cone Hose Fitting typically used?▾
How does the 45° SAE Female 45° Cone Hose Fitting differ from the 90° SAE Female 45° Cone Hose Fitting?▾
Where is the 45° SAE Female 45° Cone Hose Fitting made and how is it exported from Dubai?▾
Do you stock the 45° SAE Female 45° Cone Hose Fitting in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- 45° Bogen SAE Innengewinde 45° Bördel Schlaucharmatur
- fr
- femelle coude 45° SAE cône 45° embout de flexible
- es
- hembra SAE codo 45° cono 45° racor de manguera
- it
- femmina gomito 45° SAE cono 45° raccordo per tubo flessibile
From the blog
Written about this range
Thread & fitting identification
NPT, NPSM and SAE hose fittings: taper, swivel, flare and O-ring boss
Five American hose-end families that get confused because they share inch sizes. Which seals on the thread, which on a cone, which on an O-ring — and how to tell NPT from NPSM before it leaks.
4 min read
Assembly, crimping & certification
JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal
Most hose assemblies on American and many Asian machines end in one of three inch-thread connections: a JIC 37° swivel, an ORFS swivel with an O-ring in the face, or a pipe thread. Each has its standard (ISO 12151-5, -1 and SAE J516), its seal and its trap — a 45° SAE flare that threads onto a JIC and leaks, an NPSM swivel on a nipple with no 30° seat. The inch hose-end range, including compact and long-drop elbows, and how to order an assembly with two elbows.
4 min read
Thread & fitting identification
Hydraulic fittings and adapters: the complete guide to thread families, seats and seals
BSP, JIC, ORFS, NPT, NPSM, SAE flare, O-ring boss, metric 24° cone, Japanese 30° and SAE flanges: how each family seals, how to tell them apart, and which standard each one is made to.
6 min read








