- 01Piston, vane or gear pump — which should I use?
- Gear pumps are simple, compact and economical fixed-displacement pumps; internal gear designs such as the Rexroth PGH run quietly at relatively high pressure. Vane pumps such as the Parker T6 and T7 are quiet fixed pumps for machine tools and industrial power units. Axial piston pumps such as the A10VSO reach the highest pressures and can vary their displacement, which saves energy when demand changes.
- 02What does A10VSO 71 mean?
- A10V is Rexroth's variable-displacement axial piston series, S stands for swashplate design, O for open circuit, and 71 is the maximum displacement in cm³ per revolution. The full code adds the controller, series, rotation, shaft, port and seal options, all of which must match for a drop-in replacement.
- 03Which controls does the A10VSO offer?
- The common ones are DR, pressure control; DFR, pressure and flow (load-sensing) control; and DFLR, pressure, flow and power control. Remote pressure control and electro-proportional versions are also built. The controller code sits in the model code on the nameplate.
- 04How do I size a hydraulic pump?
- Work out the flow the circuit needs and the speed of the drive. Required displacement in cm³/rev is flow in L/min times 1,000, divided by speed in rpm and by volumetric efficiency. Then check the motor can supply the power: pressure in bar times flow in L/min, divided by 600, gives hydraulic kW before efficiency.
- 05Can you supply a like-for-like replacement pump?
- Yes. Send the complete model code and serial number from the nameplate, or a photo of it. Rotation, shaft, mounting flange, ports and controller all have to match for the new pump to fit without changes.