Bosch Rexroth A10VSO 71 Variable Axial Piston Pump, 71 cm³/rev
Category image · Hydraulic PumpsBosch Rexroth A10VSO 71 series 31: a variable-displacement swashplate axial piston pump for open circuits, 71 cm³/rev, rated 280 bar nominal and 350 bar maximum, up to 2200 rpm at full displacement.
Key features
- Displacement: 71 cm³/rev
- Pressure (peak): 350 bar
Product description
The Bosch Rexroth A10VSO 71 is a variable-displacement axial piston pump of swashplate design for hydrostatic drives in an open circuit. Its flow is proportional to drive speed and displacement, and the displacement changes steplessly with the swashplate angle. Rexroth positions series 31 as its all-purpose medium-pressure pump, in sizes 18 to 100, with good suction behaviour, low noise, long life and short control times.
Ratings, size 71
- Displacement: 71 cm³/rev
- Pressure: 280 bar nominal, 350 bar maximum
- Speed: 2200 rpm at full displacement; 2600 rpm only at reduced displacement with raised inlet pressure; 2550 rpm for the high-speed H version
- Flow (theoretical): 156 L/min at 2200 rpm, 107 L/min at 1500 rpm
- Power (theoretical, 280 bar): 73 kW at 2200 rpm, 50 kW at 1500 rpm
- Torque at 280 bar: 316 Nm
- Weight: about 35.2 kg, or 38 kg with a through drive
The type code
A full Rexroth type code reads like A10VSO 71 DR/31R-VPA…: A10VS for the swashplate unit, O for open circuit, 71 for the size, then the control, series 31, the direction of rotation (R clockwise, L counter-clockwise), the seals (V for FKM, the standard), the drive shaft, the mounting flange, the port plate and the through drive. Quote the full code from your pump's nameplate so we supply the same configuration.
- Controls: DG, DR, DFR, DFR1, DRG, ED72, ER72 and DFLR
- Mounting: ISO 3019-2 two-hole flange, Ø125 mm pilot
- Drive shafts: S or R, 1 1/4 in 14T 12/24DP splined; P, Ø32 mm keyed
- Ports: SAE flange ports to ISO 6162-1 with metric threads — pressure 1 in, suction 2 in
- Through drives: none (N00), or K01, K52, K68, K04, K07, KB2, KB3, KB4, KB5, K57
Pressure control
With the DR pressure controller the pump runs at full displacement until the set pressure, adjustable from 50 to 280 bar, is reached; it then swivels back and supplies only the flow the circuit takes. Rexroth still calls for a separate relief valve, because pressure control is not overload protection. A through drive can carry a second pump of up to the same size on the same drive.
Fluid and installation
HLP mineral oil to DIN 51524-2; HFA, HFB and HFC fluids need the E version. Operating viscosity 10–400 mm²/s, optimum 16–36 mm²/s, and up to +110 °C at the drain port with FKM seals. Filter to at least ISO 4406 20/18/15. The case drain must run to the reservoir, with case pressure no more than 2 bar absolute; inlet pressure must stay above 0.8 bar absolute.
Ordering
Send the full type code or the Rexroth material number from the nameplate. We supply new pumps and confirm lead time on the quotation.
Hydraulic
| Parameter | Value |
|---|---|
| Displacement | 71 cm³/rev |
| Pressure (peak) | 350 bar |
| Speed (max) | 2200 rpm |
| Pump type | Axial piston, swashplate, variable, open circuit |
| Nominal pressure | 280 bar |
| Flow at 1500 rpm (theoretical) | 107 L/min |
| Controls available | DG, DR, DFR, DFR1, DRG, ED72, ER72, DFLR |
| Fluid | HLP mineral oil (DIN 51524-2); up to +110 °C with FKM seals |
Mechanical
| Parameter | Value |
|---|---|
| Mounting | ISO 3019-2 two-hole flange, Ø125 mm pilot |
| Rotation | Clockwise (R); counter-clockwise (L) to order |
| Weight | 35.2 kg |
| Weight with through drive | 38 kg |
Shipping & lead time
Where and how is the Bosch Rexroth A10VSO 71 variable axial piston pump used?▾
What sizes and part numbers are listed for the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
How should I select the Bosch Rexroth A10VSO 71 variable axial piston pump for my application?▾
What working pressure applies to the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
What is the Bosch Rexroth A10VSO 71 variable axial piston pump made from?▾
Which standards apply to the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
What does the Bosch Rexroth A10VSO 71 variable axial piston pump connect to?▾
How do I fit and look after the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
Which industries and jobs use the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
How does the Bosch Rexroth A10VSO 71 variable axial piston pump differ from the Bosch Rexroth A10VSO 100 variable axial piston pump?▾
What country of origin and HS code apply to the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
What is the lead time for the Bosch Rexroth A10VSO 71 variable axial piston pump?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog







