Skip to content
+971 52 2477942
Indus Hydraulics

Category

Brass SAE 45° Flare Fittings

SAE 45° flare fittings in brass, for low- and medium-pressure tube lines.

14 SKUs1 brands

45° SAE or 37° JIC

A 45° SAE flare and a 37° JIC flare share threads in several sizes but seal on different angles, so they do not mate reliably. Check the flare angle on the tube or the mating part before ordering.

SAE J512

Brass 45° flare, inverted flare and compression tube fittings are covered by SAE J512, Automotive Tube Fittings. Pipe-thread ends are NPTF to ASME B1.20.3.

Size range

180orderable sizes
14listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Brass SAE 45° Flare Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatchOmanTypically 3 working days from dispatchQatarTypically 3 working days from dispatchBahrainTypically 3 working days from dispatchKuwaitTypically 3 working days from dispatch

Beyond the Gulf

West & Central Africa
Nigeria, Ghana, Guinea
Southern Africa
South Africa, Namibia, Botswana

See every export destination

Showing 1–14 of 14 SKUs

Sort
LatestA–ZZ–A
Brass SAE 45° flare union 90° elbow, top view
IH-BR-55

Brass SAE 45° Flare Union 90° Elbow

Indus Hydraulics45° flare on the male seating in the 45° cone of the female, metal to metalSAE 45° flare, 1/4" to 7/8"
Brass SAE 45° flare male × NPTF male 45° elbow, top view
IH-BR-54

Brass SAE 45° Flare Male × NPTF Male 45° Elbow

Indus Hydraulics45° flare on the male seating in the 45° cone of the female, metal to metalSAE 45° flare, 1/4" to 3/4"
Brass SAE 45° flare × NPTF male run tee, angled view
IH-BR-51

Brass SAE 45° Flare × NPTF Male Run Tee

Indus Hydraulicsrun teeSAE 45° flare, 3/16" to 3/4"
Brass SAE 45° flare male × NPTF female 90° elbow, top view
IH-BR-50

Brass SAE 45° Flare Male × NPTF Female 90° Elbow

Indus Hydraulics90° elbow45° flare on the male seating in the 45° cone of the female, metal to metal
Brass SAE 45° flare male × NPTF male 90° elbow, top view
IH-BR-49

Brass SAE 45° Flare Male × NPTF Male 90° Elbow

Indus Hydraulics45° flare on the male seating in the 45° cone of the female, metal to metalSAE 45° flare, 1/8" to 1"
Brass SAE 45° flare male × NPTF male connector, side view
IH-BR-48

Brass SAE 45° Flare Male × NPTF Male Connector

Indus HydraulicsSAE 45° flare, 1/8" to 1"straight connector
Brass SAE 45° flare male × NPTF female connector, side view
IH-BR-46

Brass SAE 45° Flare Male × NPTF Female Connector

Indus Hydraulics45° flare on the male seating in the 45° cone of the female, metal to metalSAE 45° flare, 1/8" to 3/4"
Brass SAE 45° flare × NPTF male branch tee, top view
IH-BR-45

Brass SAE 45° Flare × NPTF Male Branch Tee

Indus Hydraulics45° flare on the male seating in the 45° cone of the female, metal to metalSAE 45° flare, 3/16" to 3/4"
Brass SAE 45° flare union tee, angled view
IH-BR-44

Brass SAE 45° Flare Union Tee

Indus HydraulicsSAE 45° flare, 3/16" to 7/8"union tee
Brass SAE 45° flare union, side view
IH-BR-42

Brass SAE 45° Flare Union

Indus HydraulicsSAE 45° flare, 1/8" to 7/8"45° flare on the male seating in the 45° cone of the female, metal to metal
Brass SAE 45° flare nut, short, side view
IH-BR-41S

Brass SAE 45° Flare Nut, Short

Indus HydraulicsSAE 45° flare, 1/8" to 1"flare nut
Brass SAE 45° flare nut, long, angled view
IH-BR-41

Brass SAE 45° Flare Nut, Long

Indus Hydraulics45° flare on the male seating in the 45° cone of the female, metal to metalflare nut
Brass SAE 45° flare plug, side view
IH-BR-40P

Brass SAE 45° Flare Plug

Indus Hydraulicsplug45° flare on the male seating in the 45° cone of the female, metal to metal
Brass SAE 45° flare cap, side view
IH-BR-40C

Brass SAE 45° Flare Cap

Indus HydraulicscapSAE 45° flare, 3/16" to 3/4"

Questions we get asked

About this range

01What are they made from?
Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
02Do the listings show part numbers and sizes?
Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
03What pressure are they rated to?
The manufacturer publishes no pressure rating for this range. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.