Brass SAE 45° Flare × NPTF Male Run Tee

The Brass SAE 45° Flare × NPTF Male Run Tee is a run tee, in CA360 brass (C36000 free-machining brass). Its ends are SAE 45° flare male, NPTF (Dryseal) male and SAE 45° flare male. SAE 45° flare fittings carry a 45° flare on the male and a 45° cone seat in the female; the manufacturer recommends them for low- and medium-pressure lines.

Construction

• Body: run tee
• End 1: SAE 45° flare male
• End 2: NPTF (Dryseal) male
• End 3: SAE 45° flare male
• Material: CA360 brass (C36000 free-machining brass)

Ends and sealing

• SAE 45° flare: 45° flare on the male seating in the 45° cone of the female, metal to metal; SAE J512.
• NPTF (Dryseal): Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread; ASME B1.20.3.

Sizes

11 part numbers, 3/16" to 3/4". The Sizes & Part Numbers tab lists the size on each end for every one.

• End 1: SAE 45° flare, 3/16" to 3/4"
• End 2: NPTF (Dryseal), 1/8" to 3/4" (1/8-27 to 3/4-14)
• End 3: SAE 45° flare, 3/16" to 3/4"

Pressure and service

The manufacturer publishes no pressure rating for this family. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.

How to order

Quote the Indus part number from the size table. If you only have the fitting, send the size and thread type on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.