Brass SAE 45° Flare Nut, Long
Brass SAE 45° Flare Nut, Long, in CA360 brass. 8 part numbers, 1/8" to 3/4"; the size table gives the size for every Indus part number.
Key features
- Body Configuration: flare nut
- Port A Thread: SAE 45° flare, 1/8" to 3/4"
- Port A Sealing: 45° flare on the male seating in the 45° cone of the female, metal to metal
- Nominal Size Range: 1/8" to 3/4"
- Body Configuration
- flare nut
- Port A Thread
- SAE 45° flare, 1/8" to 3/4"
- Port A Sealing
- 45° flare on the male seating in the 45° cone of the female, metal to metal
Product description
The Brass SAE 45° Flare Nut, Long is the nut for an SAE 45° flared tube joint, in CA360 brass (C36000 free-machining brass). SAE 45° flare fittings carry a 45° flare on the male and a 45° cone seat in the female; the manufacturer recommends them for low- and medium-pressure lines.
Construction
- Body: flare nut
- Material: CA360 brass (C36000 free-machining brass)
Ends and sealing
- SAE 45° flare: 45° flare on the male seating in the 45° cone of the female, metal to metal; SAE J512.
Sizes
8 part numbers, 1/8" to 3/4". The Sizes & Part Numbers tab lists the size for every one.
Pressure and service
The manufacturer publishes no pressure rating for this family. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the size and thread type on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | flare nut |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | SAE 45° flare, 1/8" to 3/4" |
| Port A Sealing | 45° flare on the male seating in the 45° cone of the female, metal to metal |
| Port A Gender | female |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/8" to 3/4" |
Construction
| Parameter | Value |
|---|---|
| Material | CA360 brass (C36000 free-machining brass) |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | SAE J512 |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | Size |
|---|---|
| IH-BR-41-02 | 1/8" SAE 45° flare |
| IH-BR-41-03 | 3/16" SAE 45° flare |
| IH-BR-41-04 | 1/4" SAE 45° flare |
| IH-BR-41-05 | 5/16" SAE 45° flare |
| IH-BR-41-06 | 3/8" SAE 45° flare |
| IH-BR-41-08 | 1/2" SAE 45° flare |
| IH-BR-41-10 | 5/8" SAE 45° flare |
| IH-BR-41-12 | 3/4" SAE 45° flare |
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- SAE Innengewinde 45° Bördel Überwurfmutter
- fr
- femelle SAE cône 45° écrou tournant
- es
- hembra SAE cono 45° tuerca giratoria
- it
- femmina SAE cono 45° dado girevole
Engineers viewing this also looked at
Brass SAE 45° Flare Nut, Short
Brass SAE 45° Flare Union
Brass SAE 45° Flare Union Tee
Brass SAE 45° Flare × NPTF Male Branch Tee
Brass SAE 45° Flare Male × NPTF Female Connector
Brass SAE 45° Flare Male × NPTF Male Connector
Brass SAE 45° Flare Male × NPTF Male 90° Elbow
