Skip to content

Industrial Process Valves

101 SKUs3 brands

Showing 97–101 of 101 SKUs

Bellows-seal cage-guided control valve with tall extended bonnet and diaphragm actuator

Bellows-Seal Cage-Guided Control Valve

Indus HydraulicsPneumatic diaphragm or piston actuator, or electric actuator, with positionerASME Class 150 to 1500
Inquire
Angle-body erosion-resistant control valve with large pneumatic actuator

Angle Control Valve, Erosion Resistant

Indus HydraulicsASME Class 150 to 1500RF or RTJ flanged; butt-weld
Inquire
Lug butterfly valve with yellow spring-return pneumatic actuator and stainless control panel

Pneumatic Actuated Valves and Emergency Shutdown Valves

Indus HydraulicsASME Class 150 to 2500Pneumatic actuator, spring return or double acting
Inquire
Trunnion ball valve with red hydraulic actuator on a large flanged body

Hydraulic, Electro-Hydraulic and Gas-over-Oil Actuated Valves

Indus HydraulicsHydraulic, electro-hydraulic or gas-over-oil actuatorAPI 6D, API 600, API 609, ISO 5211
Inquire
Gate valve with yellow electric multi-turn actuator and handwheel override on a flanged body

Electric Actuated Valves: Ball, Gate, Globe and Butterfly

Indus HydraulicsElectric actuator, on-off or modulatingFlanged, butt-weld, wafer or lug
Inquire

Questions we get asked

Process valve questions

01Which pressure classes do you supply?
ASME Class 150 to 2500 across the range, with Class 4500 for pressure-seal gate, globe and check valves and forged valves. PN-rated valves are supplied where the piping is to EN 1092-1.
02Can the valves be supplied with actuators?
Yes. Gear operators, and electric, pneumatic and hydraulic actuators, are fitted and tested on the valve before dispatch. Send the operating pressure, the supply available and the fail position.
03Do you supply sour-service valves?
Yes. Valves for sour service are built and certified to NACE MR0175 / ISO 15156 when the order calls for it. State the H2S partial pressure and the material requirement in the enquiry.

From the blog

Written about this range

Oilfield & pressure control

Waterworks valves: gate, check, butterfly and air valves for water, wastewater and desalination

Ductile iron valves for mains, pump stations and treatment works: resilient-seated against metal-seated gate valves, which check valve slams and which does not, concentric and double eccentric butterfly valves, and where air release, air/vacuum and combination air valves go on a main. What AWWA C500, C515, C508, C504, C512, EN 1074 and EN 1171 actually cover, and what epoxy coatings and drinking-water approvals mean.

9 min read

Oilfield & pressure control

API 600, 602, 603 and 623 gate and globe valves: which standard covers which valve

A refinery gate valve is bought to API 600, a small-bore forged one to API 602, a thin-wall stainless one to API 603, and a globe valve to API 623 or BS 1873, all rated by ASME B16.34. What each standard covers in size, class and construction, when a bolted bonnet gives way to a pressure seal or a bellows, how solid, flexible, split and parallel gates differ, and where an API 6D slab or expanding gate fits instead.

11 min read

Oilfield & pressure control

Industrial check valve types: swing, lift, tilting disc, dual plate and axial nozzle checks compared

A check valve has one job — stop reverse flow — but the way its disc moves decides whether it closes quietly or slams. How swing, lift and piston, tilting disc, dual plate and axial (nozzle) checks differ, what API 594, API 602, API 6D and BS 1868 actually cover, why deceleration matters more than the valve alone, and what to send for a quote.

6 min read