Skip to content

Angle Control Valve, Erosion Resistant

Control ValvesEx-stock · delivery in 3 days
Angle-body erosion-resistant control valve with large pneumatic actuator
VIEW 01·Angle-body erosion-resistant control valve with large pneumatic actuator

Erosion-resistant angle control valves: NPS 1" to 12", Class 150 to 1500, hard trim and angle body for high pressure drop, flashing, solids and coal-chemical letdown service.

Key features

  • Valve type: Control valve, angle, erosion resistant
  • Construction: Angle body, hard trim
  • Design standard: IEC 60534, ASME B16.34
  • Size range: NPS 1" to 12" (DN25 to DN300)
  • Pressure class: ASME Class 150 to 1500
  • Body material: Carbon steel, stainless steel, alloy steel, duplex stainless steel
  • End connections: RF or RTJ flanged; butt-weld
  • Operation: Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
Operation
Pneumatic diaphragm or piston actuator, or electric actuator, with positioner
End connections
RF or RTJ flanged; butt-weld
Valve type
Control valve, angle, erosion resistant
Design standard
IEC 60534, ASME B16.34
Pressure class
ASME Class 150 to 1500
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

For the hardest letdown duties: coal gasification and chemical plants, flash tanks, scrubbers and wash towers, where high pressure drop, high temperature, solids and flashing steam would cut a straight-through valve apart. The angle body sends the jet into the outlet pipe, away from the body, and the trim is hardened or ceramic.

A control valve throttles flow continuously on a signal from the control system, to hold a flow, pressure, level or temperature at set point. It is sized by flow coefficient (Cv) to the duty, and supplied with its actuator, positioner and accessories assembled and calibrated.

Construction

  • Angle body: flow over the plug, jet directed downstream
  • Hardened, tungsten carbide or ceramic trim
  • Erosion- and corrosion-resistant materials
  • Heavy-duty actuator

Sizes and ratings

Published range: NPS 1" to 12" (DN25 to DN300), ASME Class 150 to 1500, in carbon steel, stainless steel, alloy steel, duplex stainless steel. End connections: RF or RTJ flanged; butt-weld. Operation: pneumatic diaphragm or piston actuator, or electric actuator, with positioner.

Dimensions depend on the size, rating and options chosen; the general arrangement drawing comes with the quotation.

Testing and documents

Shell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks, with the material certificates and the pressure-test record supplied with the valve. Third-party inspection and extra tests are added when the order specifies them.

Supply

Angle anti-erosion control valves are supplied from Dubai to projects, plants and maintenance teams across the GCC, the wider Middle East and Africa. Most are built to the order specification, so delivery depends on size, class, material and operator; standard carbon-steel sizes move fastest. We review the data sheet before quoting and flag anything that needs clarifying, such as a missing pipe schedule or an operator torque that has not been sized.

Related valves

Other control valves in the range, for comparison when the duty is not settled yet: Bellows-Seal Single-Seated Control Valve, Bellows-Seal Cage-Guided Control Valve, Multi-Stage Pressure-Reducing Control Valve, Anti-Cavitation, Single-Seated Globe Control Valve, Top Guided.

Materials

ParameterValue
Body materialCarbon steel, stainless steel, alloy steel, duplex stainless steel

Construction

ParameterValue
OperationPneumatic diaphragm or piston actuator, or electric actuator, with positioner
End connectionsRF or RTJ flanged; butt-weld

Standards

ParameterValue
Pressure testingShell and seat-leakage tests to IEC 60534-4 / ANSI FCI 70-2, with stroke and calibration checks
Design standardIEC 60534, ASME B16.34

Identification

ParameterValue
Valve typeControl valve, angle, erosion resistant
ConstructionAngle body, hard trim

Range

ParameterValue
Size rangeNPS 1" to 12" (DN25 to DN300)
Pressure classASME Class 150 to 1500

Application

ParameterValue
Typical serviceCoal chemical, flash, letdown, solids-laden service

Supply

ParameterValue
SupplyBuilt to order and supplied from Dubai with material certificates and the test record

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at