Skip to content
+971 52 2477942
Indus Hydraulics

Category

Brass Inverted Flare Fittings

Inverted flare fittings in brass, for brake, fuel and other small-bore tube lines.

12 SKUs1 brands

How an inverted flare seals

The tube end is double flared at 45° and clamped inside the port by a male tube nut, so the seal sits inside the fitting and the threads are shielded. Use a double flare and a nut from the same system.

SAE J512

Inverted flare fittings are covered by SAE J512, Automotive Tube Fittings. Pipe-thread ends are NPTF to ASME B1.20.3.

Size range

74orderable sizes
12listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Brass Inverted Flare Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatchOmanTypically 3 working days from dispatchQatarTypically 3 working days from dispatchBahrainTypically 3 working days from dispatchKuwaitTypically 3 working days from dispatch

Beyond the Gulf

South-East Asia
Singapore, Laos, Brunei
North Africa
Egypt, Algeria, Tunisia
East Africa
Kenya, Rwanda, Burundi

See every export destination

Showing 1–12 of 12 SKUs

Sort
LatestA–ZZ–A
Brass inverted flare × NPTF male run tee, angled view
IH-BR-3752

Brass Inverted Flare × NPTF Male Run Tee

Indus Hydraulicsrun teeinverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shielded
Brass inverted flare union tee, angled view
IH-BR-3702

Brass Inverted Flare Union Tee

Indus Hydraulicsinverted flare, 1/8" to 1/2"union tee
Brass inverted flare × NPTF female branch tee, angled view
IH-BR-3652

Brass Inverted Flare × NPTF Female Branch Tee

Indus Hydraulicsbranch teeinverted flare, 3/16" to 3/8"
Brass inverted flare × NPTF male branch tee, angled view
IH-BR-3602

Brass Inverted Flare × NPTF Male Branch Tee

Indus Hydraulicsbranch teeinverted flare, 3/16" to 3/8"
Brass inverted flare union 90° elbow, angled view
IH-BR-3502

Brass Inverted Flare Union 90° Elbow

Indus Hydraulics90° union elbowinverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shielded
Brass inverted flare × NPTF female 90° elbow, angled view
IH-BR-3452

Brass Inverted Flare × NPTF Female 90° Elbow

Indus Hydraulics90° elbowinverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shielded
Brass inverted flare × NPTF male 90° elbow, side view
IH-BR-3402

Brass Inverted Flare × NPTF Male 90° Elbow

Indus Hydraulicsinverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shieldedinverted flare, 1/8" to 3/4"
Brass inverted flare × NPTF male 45° elbow, angled view
IH-BR-3352

Brass Inverted Flare × NPTF Male 45° Elbow

Indus Hydraulicsinverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shielded45° elbow
Brass inverted flare union, side view
IH-BR-3302

Brass Inverted Flare Union

Indus Hydraulicsstraight unioninverted flare, 1/8" to 5/8"
Brass inverted flare × NPTF female connector, angled view
IH-BR-3252

Brass Inverted Flare × NPTF Female Connector

Indus Hydraulicsinverted flare: a double-flared tube end is clamped inside the port by a male tube nut, so the seal sits inside and the threads are shieldedstraight connector
Brass inverted flare × NPTF male connector, side view
IH-BR-3202

Brass Inverted Flare × NPTF Male Connector

Indus Hydraulicsstraight connectorinverted flare, 1/8" to 3/4"
Brass inverted flare tube nut, angled view
IH-BR-3100

Brass Inverted Flare Tube Nut

Indus Hydraulicsinverted flare, 3/16" to 1/2"tube nut

Questions we get asked

About this range

01What are they made from?
Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
02Do the listings show part numbers and sizes?
Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
03What pressure are they rated to?
The manufacturer publishes no pressure rating for this range. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.