Skip to content

Well Testing Equipment

15 SKUs1 brands

Showing 1–15 of 15 SKUs

Category image · Well Testing Equipment
Yellow data header spool with flanged ends and instrument ports along the body

Data Header, 2-1/16" to 5-1/8", 2,000 to 20,000 psi

Indus Hydraulics2,000 to 20,000 psi working pressureFlanged, hammer union or threaded
Inquire
Category image · Well Testing Equipment
Category image · Well Testing Equipment
Double-barrel screen desander in a tall blue lifting frame with valves and gauges

Double Barrel Screen Desander, 5,000 to 20,000 psi

Indus HydraulicsAPI 6A (21st edition)5,000 to 20,000 psi working pressure
Inquire
Skid-mounted dual-channel debris catcher with white filter bodies and blue-handwheel valves

Debris Catcher, Dual Channel, 5,000 to 20,000 psi

Indus HydraulicsHammer union or flangedManual valves
Inquire
Blue vertical cyclone desander with sand storage cylinder, gate valves and gauges

Cyclone Desander, 5,000 to 20,000 psi

Indus HydraulicsAPI 6A (21st edition)Desander, cyclone
Inquire
Category image · Well Testing Equipment
Category image · Well Testing Equipment

Questions we get asked

About this range

01What is in a surface well-test package?
Flow leaves the wellhead through a flowhead or surface test tree and a choke manifold that controls the rate, passes through a sand filter where needed and into a 3-phase separator, which splits and meters oil, gas and water. Oil goes to a surge tank and transfer pump, gas to the flare, and a data header collects pressures and temperatures along the way. An ESD panel and surface safety valve can shut the well in at any point.
02What does a 3-phase test separator do?
It slows the flow in a pressure vessel so that gas, oil and water separate by gravity, then meters each phase leaving through its own outlet. Its results give the well's production rates and gas-oil and water-cut ratios, and it provides representative samples of each phase.
03Multiphase flowmeter or test separator?
A multiphase flowmeter (MPFM) measures oil, gas and water rates without separating them, so it is compact and gives continuous readings. A separator measures each phase after separating it and provides samples. Many tests run both: the MPFM for continuous rates, the separator to verify and sample.
04What does an ESD panel do?
It controls the surface safety valve. The panel holds the SSV open with hydraulic pressure and releases it to shut the well in on a trip from a remote station, a high or low pressure pilot or a fire loop.
05Can the package be built for sour service?
Yes. Vessels, piping and valves are built in NACE MR0175 materials for H2S service; tell us the H2S and CO2 content, pressure and temperature so the materials are qualified for them.
06Are well-testing packages built to order?
Yes. Each unit is built to the pressure, capacity, certification and skid design you specify, and the lead time is confirmed at quotation.