Flush / Test Pump, Reciprocating 150 HP, 10,000 psi, Skid + Chart Recorder
Backside Flush / Test PumpsMFR FTP-R150-10K-CHREx-stock · delivery in 3 days
Category image · Well Testing Equipment150 HP reciprocating flush / test pump with 10,000 psi MAWP, water-on-water plunger lubrication, paper-chart + electronic recorders. Skid-mounted.
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer
Product description
Reciprocating flush / test pump with 150 HP rating and 10,000 psi MAWP for line / casing flushing and pressure testing. Water-on-water plunger lubrication (water is both pumped fluid and plunger lubricant).
Electronic and paper-chart recorders integrated for testing documentation. Compact skid envelope; small trailer variant for pickup-truck towing. 100, 130, 150 and 180 HP ratings available.
Shipping & lead time
Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.
OriginMade in United Arab Emirates
What is a 150 HP reciprocating flush and test pump used for?▾
A reciprocating flush and test pump flushes lines and casing and pressure-tests them. This unit is rated 150 HP and 10,000 psi MAWP, with water-on-water plunger lubrication, on a skid with a chart recorder.
What does water-on-water lubrication mean on this flush and test pump?▾
Water-on-water means the pumped water also lubricates the plunger, so no separate lubricant is needed. The 150 HP pump is rated 10,000 psi MAWP.
What power ratings does the flush and test pump come in?▾
The pump is available in 100, 130, 150 and 180 HP ratings. This listing is the 150 HP, 10,000 psi unit on a compact skid, with a small trailer variant for pickup-truck towing.
Skid or trailer: how is the 150 HP flush and test pump mounted?▾
The listed unit is skid-mounted with a compact envelope. A small trailer variant can be towed by a pickup truck; give your transport requirement on the RFQ.
What is the maximum pressure of the 10,000 psi flush and test pump?▾
The pump is rated 10,000 psi MAWP, the maximum allowable working pressure, so it can test lines up to that pressure. Always keep the test below the lowest-rated component in the line.
What fluid does the flush and test pump handle?▾
It pumps water, which is also the plunger lubricant (water-on-water). For other fluids, state the fluid on the RFQ so the fluid end and seals are matched.
Which records does the pump produce for pressure tests?▾
Electronic and paper-chart recorders are integrated, giving a testing record for documentation. State whether you need the chart recorder calibration certificate on the RFQ.
What does the flush and test pump connect to?▾
It connects to the line, casing or manifold being flushed or tested through the discharge connection of the unit. See the well testing equipment guide and the data header shelf for test-line instruments.
How do I pressure-test a line with the 150 HP test pump?▾
Fill the line with water, close it, then raise the pressure in steps with the pump while the recorder logs it. Hold at the test pressure, then bleed down safely.
Flush and test pump or transfer pump: what is the difference?▾
A flush and test pump is a 10,000 psi reciprocating unit for pressure tests, while a transfer pump moves fluid at low pressure. See the well-test transfer pump shelf for transfer duty.
Can the 150 HP flush and test pump be exported from Dubai?▾
Yes. We supply it from Dubai, UAE and ship worldwide on its skid. Tell us the destination and the HP rating and we confirm freight and lead time on the quotation.
Do you stock the 150 HP flush and test pump in Dubai?▾
Yes. We keep the 150 HP flush and test pump in stock at our warehouse in Dubai, UAE, and ship worldwide with the best lead times. Send the HP rating, mounting and quantity through our contact page for a quotation.
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
