- 01Can a snatch block be used for lifting?
- Yes, within its rated load — but the load on the block is not the load on the rope. With the rope turned through 180° the block carries about twice the line pull, so rate the block, its hook or shackle and its anchor point for that.
- 02Do the parts come with test certificates?
- Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
- 03How do I work out the load on a snatch block when the rope turns less than 180°?
- Multiply the line pull by twice the cosine of half the angle between the two lead lines. With the lines parallel (a 180° turn) the factor is 2.0; with 60° between them it is about 1.73, at 90° about 1.41, at 120° 1.0 and at 150° about 0.52. The block, its hook or shackle and the anchor point must each be rated for that resultant load, not for the line pull.
- 04What is the difference between a snatch block and a pulley block?
- A snatch block has a side plate that swings or slides open, so the rope can be laid into the sheave at any point along its length without threading the end through. A pulley block is closed, and the rope end has to be reeved through it. Snatch blocks are used to redirect a winch or hoist line; closed blocks are used in fixed tackles and reeved purchases.
- 05Can I run wire rope through a pulley made for fibre rope?
- No. Blocks are made for one kind and size of rope. Wire rope needs a steel sheave with a groove that matches its diameter and a sheave large enough for that rope; a wooden-shell, nylon or fibre-rope block has a groove and sheave diameter suited to fibre rope, and wire rope will damage the sheave and itself. Check the rope type and diameter marked on the block or in the size table before reeving.
- 06Hook, shackle or swivel eye — which snatch block attachment should I choose?
- Choose on how the block is anchored and how often it is moved. A hook with a latch is quickest to rig and re-rig; a shackle stays captive on its anchor and suits a block that will stay in place or might otherwise jump off; a swivel eye or swivel hook lets the block turn to line up with the rope, and a fixed eye holds it in one plane. Whichever you choose, it must be rated for the full block load, not the line pull.
- 07What types of snatch block are there?
- The range includes light snatch blocks to the 404, 408, 409, 418 and 419 patterns, champion and super-champion blocks, heavy duty snatch blocks and metric snatch blocks with swivel hook from 0.5 to 5 t. Steel, malleable-iron, wooden and stainless pulley blocks are also listed.
- 08What WLL do snatch blocks have?
- For example, the light double snatch blocks (408 and 409 patterns) are listed from 4 to 15 t on 4-1/2" to 18" sheaves. The 419 light snatch block runs 2 to 15 t, and heavy duty snatch blocks 2 to 15 t. The size table on this page lists each listing.