Skip to content
+971 52 2477942

Questions we get asked

About this range

01Are cable socks for lifting?
No. A cable sock is a pulling grip for drawing cable or hose through ducts and over rollers; its breaking load is a pulling figure, not a lifting rating.

Category

Cable Socks

Single-eye, double-eye, side-pull and high-voltage cable socks (pulling grips) for drawing cable and hose.

4 SKUs0 brands

Size range

41orderable sizes
4listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Cable Socks across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Rigging hardware is bought on its working load limit and its certificate, and both travel with the part: every shackle, hook, chain and sling ships from Dubai with the manufacturer's test certificate, so the receiving inspection checks a document against a stamp rather than a claim. Hardware and fittings go by air or courier in cartons; wire rope, chain, hoists and anchors are heavy enough that sea freight is usually the sensible answer.

Showing 1–4 of 4 SKUs

Single-Eye Cable Sock (Cable Pulling Grip)
IH-LR-CS-SE

Single-Eye Cable Sock (Cable Pulling Grip)

6-10 mm to 120-150 mm
High-Voltage Cable Sock (Cable Pulling Grip)
IH-LR-CS-HV

High-Voltage Cable Sock (Cable Pulling Grip)

25-70 mm to 500-630 mm
Double-Eye Cable Sock (Cable Pulling Grip)
IH-LR-CS-DE

Double-Eye Cable Sock (Cable Pulling Grip)

6-10 mm to 120-150 mm
Side-Pull Cable Sock (Cable Pulling Grip)
IH-LR-CS-SP

Side-Pull Cable Sock (Cable Pulling Grip)

6-10 mm to 120-150 mm