High-Voltage Cable Sock (Cable Pulling Grip)
High-Voltage Cable Sock (Cable Pulling Grip), in 8 sizes, 25-70 mm to 500-630 mm. A pulling grip, not a lifting sling. Indus part numbers, manufacturer's test certificate.
Key features
- Product type: High-Voltage Cable Sock (Cable Pulling Grip)
- Size range: 25-70 mm to 500-630 mm
- Size range
- 25-70 mm to 500-630 mm
Product description
Cable socks are woven pulling grips for drawing cable or hose through ducts and over rollers.
Sizes and ratings
8 sizes, 25-70 mm to 500-630 mm. Minimum breaking load 3,000 to 6,500 kg. Every size has its own Indus part number in the table below, with the loads in the unit the manufacturer rates them in.
Choosing a size
Match the sock to the cable or hose outside diameter, and keep the pull within its breaking load with a margin. It is a pulling grip, not a lifting sling.
Ordering
Quote the Indus part number from the size table, or send the size and working load you need. Each consignment ships with the manufacturer's test certificate; say on the RFQ if your site needs anything more.
Identification
| Parameter | Value |
|---|---|
| Product type | High-Voltage Cable Sock (Cable Pulling Grip) |
| Sizes | 8 |
Dimensions
| Parameter | Value |
|---|---|
| Size range | 25-70 mm to 500-630 mm |
Performance
| Parameter | Value |
|---|---|
| Minimum breaking load | 3,000 to 6,500 kg |
Compliance
| Parameter | Value |
|---|---|
| Certification | Manufacturer's test certificate |
Shipping & lead time
Sizes & part numbers
8 sizes| Indus part no. | Size | Min breaking load (kg) | Overall length (mm) |
|---|---|---|---|
| IH-LR-CS-HV-25-70MM | 25-70 mm | 3,000 | 1,700 |
| IH-LR-CS-HV-70-120MM | 70-120 mm | 3,500 | 1,800 |
| IH-LR-CS-HV-120-150MM | 120-150 mm | 4,000 | 1,900 |
| IH-LR-CS-HV-150-240MM | 150-240 mm | 4,500 | 2,000 |
| IH-LR-CS-HV-240-300MM | 240-300 mm | 5,000 | 2,100 |
| IH-LR-CS-HV-300-400MM | 300-400 mm | 5,500 | 2,200 |
| IH-LR-CS-HV-400-500MM | 400-500 mm | 6,000 | 2,200 |
| IH-LR-CS-HV-500-630MM | 500-630 mm | 6,500 | 2,200 |
Size — Nominal size as the manufacturer states it. Min breaking load — Minimum breaking load. A test figure — never lift to it. Overall length — Overall length. Ask us for the dimension drawing if you need it stamped.
WLL is the most the part may carry in service. Proof and breaking loads are test figures — never lift to them. Each load is shown in the unit the manufacturer rates the part in, and a size ships with the manufacturer’s test certificate.
This range is published with a breaking load only, not a working load limit. Tell us the duty before using it to lift, and we will confirm a rating or recommend a rated part.
What sizes does the high-voltage cable sock (cable pulling grip) come in?▾
Are cable socks for lifting?▾
Do the parts come with a test certificate?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
