Category
Brass Push-Lock Hose Barbs
Push-on hose barbs in brass for push-lock hose, fitted without clamps or ferrules.
Fitting push-lock hose
Push the hose over the barbs until it reaches the collar; no clamp or ferrule is needed. The manufacturer recommends push-lock barbs for low-pressure lines, so check the hose rating and the medium before ordering.
Thread ends
Pipe-thread ends are NPTF to ASME B1.20.3, NPSM swivels to ASME B1.20.1, JIC ends to SAE J514 and garden hose ends to ASME B1.20.7.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Brass Push-Lock Hose Barbs across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- East Africa
- Kenya, Madagascar, Mozambique
- West & Central Africa
- Nigeria, Mali, Burkina Faso
- Southern Africa
- South Africa, Namibia, Botswana
Brass Push-Lock Hose Barb × Garden Hose Female Swivel
Brass Push-Lock Hose Barb × Garden Hose Male
Brass Push-Lock Hose Barb × JIC 37° Female Swivel
Brass Push-Lock Hose Barb × Tube Shank
Brass Push-Lock Hose Barb × Inverted Flare Female
Brass Push-Lock Hose Barb × Inverted Flare Male Swivel
Brass Push-Lock Hose Barb × Dual-Seat Female Swivel (SAE 45° / JIC 37°)
Brass Push-Lock Hose Barb × JIC 37° Male
Brass Push-Lock Hose Barb × SAE 45° Flare Female Swivel
Brass Push-Lock Hose Barb × SAE 45° Flare Male
Brass Push-Lock Hose Barb × NPSM Female Swivel, Gasket Seal
Brass Push-Lock Hose Barb × NPSM Female Swivel, Ball Seat
Brass Push-Lock Hose Barb × NPTF Male 90° Elbow
Brass Push-Lock Hose Barb × NPTF Male
Brass Push-Lock Hose Barb × NPTF Male Swivel
Brass BSPP Female Swivel × Push-Lock Hose Barb
Questions we get asked
About this range
- 01What are they made from?
- Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
- 02Do the listings show part numbers and sizes?
- Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
- 03What pressure are they rated to?
- The manufacturer publishes no pressure rating for this range. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.