Category
O-Rings for ORB & ORFS Adapters
Replacement O-rings for ORB ports and ORFS face seals, in Buna-N and Viton.
Buna-N or Viton
Buna-N (NBR) suits petroleum hydraulic oils at normal temperatures. Viton (FKM) is chosen for higher temperatures and for fluids that attack NBR. Each listing gives the O-ring size for every fitting size.
Sizes
ORB O-rings carry the 9xx size numbers used for straight-thread boss seals; ORFS O-rings carry the size the manufacturer gives for each face-seal size.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
O-Rings for ORB & ORFS Adapters across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- North Africa
- Egypt, Mauritania, Morocco
- East Africa
- Kenya, Madagascar, Mozambique
Hydraulic O-Ring Assortment Kit, 288 Pieces in 24 Sizes
Questions we get asked
About this range
- 01When should the O-ring be replaced?
- Every time an ORB or ORFS joint is broken and remade, and whenever the O-ring is cut, flattened or hardened.