Category
Steel Hose Barb Adapters
Beaded hose barb adapters in zinc-plated steel, for push-on hose on low-pressure lines.
Choosing a barb
Match the barb size to the hose inside diameter, then pick the thread end. A beaded barb holds push-on hose on low-pressure lines; check the hose rating and the medium before ordering.
Thread ends
Pipe-thread ends are NPTF to ASME B1.20.3 and ORB ends are SAE J1926.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Steel Hose Barb Adapters across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Liberia, Sierra Leone
- Southern Africa
- South Africa, Zimbabwe, Namibia
- South-East Asia
- Singapore, Philippines, Cambodia
Steel Beaded Hose Barb × ORB Male Adapter
Category image · Hoses & FittingsSteel Beaded Hose Barb × ORB Male 90° Elbow
Category image · Hoses & FittingsSteel Beaded Hose Barb × ORB Male 45° Elbow
Category image · Hoses & FittingsSteel Beaded Hose Barb Mender Tee
Category image · Hoses & FittingsSteel Beaded Hose Barb × NPTF Male 45° Elbow
Category image · Hoses & FittingsSteel Beaded Hose Barb × NPTF Male 90° Elbow
Questions we get asked
About this range
- 01What pressure are they rated to?
- The manufacturer publishes no pressure rating for these barbs. Tell us the medium and working pressure and we will confirm the fitting before you order.