Steel Beaded Hose Barb × NPTF Male 90° Elbow
Category image · Hoses & FittingsSteel Beaded Hose Barb × NPTF Male 90° Elbow, forged carbon steel, trivalent zinc plated. 21 part numbers, 1/4" to 2" hose; the size table gives the size on each end for every Indus part number.
Key features
- Body Configuration: 90° elbow
- Port A Thread: beaded hose barb, 1/4" to 2"
- Port A Sealing: beaded hose barb for push-on hose; the bead resists the hose pulling off
- Nominal Size Range: 1/4" to 2" hose
- Body Configuration
- 90° elbow
- Port A Thread
- beaded hose barb, 1/4" to 2"
- Port A Sealing
- beaded hose barb for push-on hose; the bead resists the hose pulling off
Product description
The Steel Beaded Hose Barb × NPTF Male 90° Elbow is a 90° elbow, in forged carbon steel, trivalent zinc plated. Its ends are beaded hose barb and NPTF (Dryseal) male. Beaded hose barbs take push-on hose on low-pressure lines; check the hose rating and the medium before ordering.
Construction
- Body: 90° elbow
- End 1: beaded hose barb
- End 2: NPTF (Dryseal) male
- Material: forged carbon steel, trivalent zinc plated
Ends and sealing
- beaded hose barb: beaded hose barb for push-on hose; the bead resists the hose pulling off.
- NPTF (Dryseal): Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread; ASME B1.20.3.
Sizes
21 part numbers, 1/4" to 2" hose. The Sizes & Part Numbers tab lists the size on each end for every one.
- End 1: beaded hose barb, 1/4" to 2"
- End 2: NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5)
Pressure rating
The manufacturer publishes no pressure rating for this family. Tell us the working pressure your line sees and we will confirm the fitting is rated for it before you order.
How to order
Quote the Indus part number from the size table. If you only have the fitting, send the thread or tube size on each end, and Indus engineering will confirm the part number. Price and lead time are confirmed with the quotation.
Identification
| Parameter | Value |
|---|---|
| Body Configuration | 90° elbow |
Port A
| Parameter | Value |
|---|---|
| Port A Thread | beaded hose barb, 1/4" to 2" |
| Port A Sealing | beaded hose barb for push-on hose; the bead resists the hose pulling off |
Port B
| Parameter | Value |
|---|---|
| Port B Thread | NPTF (Dryseal), 1/8" to 2" (1/8-27 to 2-11.5) |
| Port B Sealing | Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread |
| Port B Gender | male |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | 1/4" to 2" hose |
Construction
| Parameter | Value |
|---|---|
| Material | forged carbon steel, trivalent zinc plated |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ASME B1.20.3 |
Shipping & lead time
Sizes & part numbers
21 sizes| Indus part no. | End 1 | End 2 |
|---|---|---|
| IH-ST-4501-04-02 | 1/4" hose barb | 1/8" NPTF (1/8-27) |
| IH-ST-4501-04-04 | 1/4" hose barb | 1/4" NPTF (1/4-18) |
| IH-ST-4501-06-04 | 3/8" hose barb | 1/4" NPTF (1/4-18) |
| IH-ST-4501-06-06 | 3/8" hose barb | 3/8" NPTF (3/8-18) |
| IH-ST-4501-06-08 | 3/8" hose barb | 1/2" NPTF (1/2-14) |
| IH-ST-4501-08-06 | 1/2" hose barb | 3/8" NPTF (3/8-18) |
| IH-ST-4501-08-08 | 1/2" hose barb | 1/2" NPTF (1/2-14) |
| IH-ST-4501-08-12 | 1/2" hose barb | 3/4" NPTF (3/4-14) |
| IH-ST-4501-10-06 | 5/8" hose barb | 3/8" NPTF (3/8-18) |
| IH-ST-4501-10-08 | 5/8" hose barb | 1/2" NPTF (1/2-14) |
| IH-ST-4501-10-12 | 5/8" hose barb | 3/4" NPTF (3/4-14) |
| IH-ST-4501-12-06 | 3/4" hose barb | 3/8" NPTF (3/8-18) |
| IH-ST-4501-12-08 | 3/4" hose barb | 1/2" NPTF (1/2-14) |
| IH-ST-4501-12-12 | 3/4" hose barb | 3/4" NPTF (3/4-14) |
| IH-ST-4501-12-16 | 3/4" hose barb | 1" NPTF (1-11.5) |
| IH-ST-4501-16-12 | 1" hose barb | 3/4" NPTF (3/4-14) |
| IH-ST-4501-16-16 | 1" hose barb | 1" NPTF (1-11.5) |
| IH-ST-4501-20-16 | 1-1/4" hose barb | 1" NPTF (1-11.5) |
| IH-ST-4501-20-20 | 1-1/4" hose barb | 1-1/4" NPTF (1-1/4-11.5) |
| IH-ST-4501-24-24 | 1-1/2" hose barb | 1-1/2" NPTF (1-1/2-11.5) |
| IH-ST-4501-32-32 | 2" hose barb | 2" NPTF (2-11.5) |
End 1 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. End 2 — Thread or flange nominal size at this end, exactly as the manufacturer prints it. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is it made from?▾
Which sizes are available?▾
What pressure is it rated to?▾
How does it seal?▾
What is the lead time?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
Engineers viewing this also looked at
Steel Beaded Hose Barb × NPTF Male 45° Elbow
Steel Beaded Hose Barb Mender Tee
Steel Beaded Hose Barb × ORB Male 90° Elbow
Steel Beaded Hose Barb × ORB Male 45° Elbow
Steel Beaded Hose Barb × ORB Male Adapter
Tompkins 4444 Hose Barb × Male NPTF Adapter
