Skip to content
+971 52 2477942
Indus Hydraulics

Category

Brass NPTF Pipe Fittings

NPTF Dryseal pipe fittings in brass, for air, water, fuel and low-pressure oil lines.

21 SKUs1 brands

NPTF or NPT

NPTF (Dryseal) threads are cut so the crests and roots close up as the joint is tightened, so they seal on the thread; they also mate with standard NPT threads, which rely on sealant or tape. Pick the body form, then the size on each end from the size table.

ASME B1.20.3 and B1.20.1

Dryseal NPTF threads are defined by ASME B1.20.3 and NPT threads by ASME B1.20.1. The NPSM straight thread on the locknuts is also in B1.20.1 and does not seal on the thread.

Size range

193orderable sizes
21listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Brass NPTF Pipe Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatchOmanTypically 3 working days from dispatchQatarTypically 3 working days from dispatchBahrainTypically 3 working days from dispatchKuwaitTypically 3 working days from dispatch

Beyond the Gulf

South-East Asia
Singapore, Brunei, Timor-Leste
North Africa
Egypt, Morocco, Algeria
East Africa
Kenya, Rwanda, Burundi

See every export destination

Showing 1–21 of 21 SKUs

Sort
LatestA–ZZ–A
Brass NPTF 45° street elbow, top view
IH-BR-3350

Brass NPTF 45° Street Elbow

Indus Hydraulics45° street elbowDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF female pipe union, angled view
IH-BR-3250

Brass NPTF Female Pipe Union

Indus Hydraulicspipe unionNPTF (Dryseal), 1/8" to 3/4" (1/8-27 to 3/4-14)
Brass garden hose male × NPTF male adapter, angled view
IH-BR-514

Brass Garden Hose Male × NPTF Male Adapter

Indus Hydraulics3/4-11.5 NH garden hose thread, sealed by a washer in the female couplinggarden hose thread, 3/4-11.5 NH
Brass NPTF female cross, top view
IH-BR-3950

Brass NPTF Female Cross

Indus HydraulicsNPTF (Dryseal), 1/8" to 1" (1/8-27 to 1-11.5)cross
Brass NPTF street tee, top view
IH-BR-3750

Brass NPTF Street Tee

Indus HydraulicsNPTF (Dryseal), 1/8" to 3/4" (1/8-27 to 3/4-14)street tee
Brass NPTF female tee, top view
IH-BR-3700

Brass NPTF Female Tee

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadNPTF (Dryseal), 1/8" to 1-1/2" (1/8-27 to 1-1/2-11.5)
Brass NPTF female × NPTF male branch tee, top view
IH-BR-3600

Brass NPTF Female × NPTF Male Branch Tee

Indus Hydraulicsbranch teeDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF female 90° elbow, top view
IH-BR-3500

Brass NPTF Female 90° Elbow

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread90° elbow
Brass NPTF 90° street elbow, top view
IH-BR-3400

Brass NPTF 90° Street Elbow

Indus Hydraulics90° street elbowDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF male 90° elbow, angled view
IH-BR-3390

Brass NPTF Male 90° Elbow

Indus HydraulicsNPTF (Dryseal), 1/8" to 1/2" (1/8-27 to 1/2-14)Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF seamless pipe nipple, side view
IH-BR-3326

Brass NPTF Seamless Pipe Nipple

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadpipe nipple
Brass NPTF male hex nipple, side view
IH-BR-3325

Brass NPTF Male Hex Nipple

Indus Hydraulicshex nippleNPTF (Dryseal), 1/8" to 1" (1/8-27 to 1-11.5)
Brass NPTF female coupling, side view
IH-BR-3300

Brass NPTF Female Coupling

Indus Hydraulicsstraight couplingDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF male × NPTF female hex bushing, side view
IH-BR-3220

Brass NPTF Male × NPTF Female Hex Bushing

Indus HydraulicsbushingDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF female × NPTF male adapter, side view
IH-BR-3200

Brass NPTF Female × NPTF Male Adapter

Indus Hydraulicsstraight adapterNPTF (Dryseal), 1/8" to 3/4" (1/8-27 to 3/4-14)
Brass NPTF countersunk hex socket pipe plug, side view
IH-BR-3155

Brass NPTF Countersunk Hex Socket Pipe Plug

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadNPTF (Dryseal), 1/8" to 3/4" (1/8-27 to 3/4-14)
Brass NPTF hex head pipe plug, side view
IH-BR-3152

Brass NPTF Hex Head Pipe Plug

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadplug
Brass NPTF square head pipe plug, side view
IH-BR-3151

Brass NPTF Square Head Pipe Plug

Indus HydraulicsNPTF (Dryseal), 1/8" to 1" (1/8-27 to 1-11.5)Dryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the thread
Brass NPTF slotted head pipe plug, side view
IH-BR-3150

Brass NPTF Slotted Head Pipe Plug

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadplug
Brass NPTF female pipe cap, side view
IH-BR-3129

Brass NPTF Female Pipe Cap

Indus HydraulicsDryseal taper pipe thread, cut so the crests and roots close up as the joint is tightened, so it seals on the threadcap
Brass NPSM pipe locknut, side view
IH-BR-1102

Brass NPSM Pipe Locknut

Indus HydraulicsNPSM, 1/8" to 1/2" (1/8-27 to 1/2-14)straight pipe thread that does not seal on the thread; the joint seals on a seat or gasket

Questions we get asked

About this range

01What are they made from?
Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
02Do the listings show part numbers and sizes?
Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
03What pressure are they rated to?
The manufacturer publishes no pressure rating for this range. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.