Category
THY Series Crimp Hose Fittings
THY Series crimp hose fittings for braided, pressure-wash and thermoplastic hose.
Stay in one series
Crimp fittings are made for a particular hose and crimp specification. Do not mix series or makers in one assembly; send us the hose and we will confirm the fitting.
Thread ends
NPTF ends follow ASME B1.20.3, ORB ends SAE J1926 and flareless compression ends SAE J514.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
THY Series Crimp Hose Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- Southern Africa
- South Africa, Botswana, Zambia
THY Series Crimp Hose Fitting × Stand Tube
THY Series Crimp Hose Fitting × Flareless Compression Male (SAE J514)
THY Series Crimp Hose Fitting × NPTF Male Swivel 90°
THY Series Crimp Hose Fitting, Hose Mender
THY Series Crimp Hose Fitting × ORB Male Swivel, 90° Block
THY Series Crimp Hose Fitting × Female Weld Fitting
THY Series Crimp Hose Fitting × NPSM Female Swivel
THY Series Crimp Hose Fitting × NPTF Female
Questions we get asked
About this range
- 01What pressure are they rated to?
- The manufacturer publishes no pressure rating for these hose ends. An assembly is rated to the lower of the hose and the end; tell us the hose and working pressure and we will confirm it.