Skip to content
+971 52 2477942
Indus Hydraulics

Category

Brass DOT Push-In Air Brake Fittings

Push-to-connect air brake fittings in brass for SAE J844 nylon tubing, rated by the manufacturer to 150 psi on compressed air.

12 SKUs1 brands

Fitting the tube

Cut the nylon tube square and push it fully home: a collet grips it and an O-ring seals it. Male pipe threads come with sealant already applied. These fittings are for compressed air only, from −40 °F to +200 °F.

FMVSS 571.106 and SAE J2494

The manufacturer states compliance with FMVSS 571.106, the US brake-hose standard, and SAE J2494 for push-to-connect air brake fittings, for use with SAE J844 nylon tubing.

Size range

92orderable sizes
12listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Brass DOT Push-In Air Brake Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatchOmanTypically 3 working days from dispatchQatarTypically 3 working days from dispatchBahrainTypically 3 working days from dispatchKuwaitTypically 3 working days from dispatch

Beyond the Gulf

Southern Africa
South Africa, Botswana, Zambia
South-East Asia
Singapore, Cambodia, Laos
North Africa
Egypt, Tunisia, Mauritania

See every export destination

Showing 1–12 of 12 SKUs

Sort
LatestA–ZZ–A
Category image · Hoses & Fittings
IH-BR-DOTS54

Brass DOT Push-In Air Brake × NPTF Male 45° Swivel Elbow

Indus HydraulicsDOT push-in tube end, 1/4" to 3/4"push-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ring
Brass DOT push-in air brake bulkhead union, angled view
IH-BR-DOT82

Brass DOT Push-In Air Brake Bulkhead Union

Indus Hydraulicspush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ringbulkhead union
Brass DOT push-in air brake × NPTF male branch tee, angled view
IH-BR-DOT72

Brass DOT Push-In Air Brake × NPTF Male Branch Tee

Indus Hydraulicspush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ringDOT push-in tube end, 1/4" to 1/2"
Brass DOT push-in air brake × NPTF male run tee, angled view
IH-BR-DOT71

Brass DOT Push-In Air Brake × NPTF Male Run Tee

Indus Hydraulicsrun teeDOT push-in tube end, 1/4" to 1/2"
Brass DOT push-in air brake × NPTF female 90° elbow, angled view
IH-BR-DOT70

Brass DOT Push-In Air Brake × NPTF Female 90° Elbow

Indus Hydraulics90° elbowpush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ring
Brass DOT push-in air brake × NPTF male 90° elbow, angled view
IH-BR-DOT69

Brass DOT Push-In Air Brake × NPTF Male 90° Elbow

Indus Hydraulics90° elbowpush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ring
Brass DOT push-in air brake × NPTF male connector, angled view
IH-BR-DOT68

Brass DOT Push-In Air Brake × NPTF Male Connector

Indus Hydraulicspush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ringDOT push-in tube end, 1/4" to 3/4"
Brass DOT push-in air brake × NPTF female connector, angled view
IH-BR-DOT66

Brass DOT Push-In Air Brake × NPTF Female Connector

Indus Hydraulicspush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ringDOT push-in tube end, 1/4" to 1/2"
Brass DOT push-in air brake union 90° elbow, angled view
IH-BR-DOT65

Brass DOT Push-In Air Brake Union 90° Elbow

Indus HydraulicsDOT push-in tube end, 1/4" to 1/2"push-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ring
Brass DOT push-in air brake union tee, angled view
IH-BR-DOT64

Brass DOT Push-In Air Brake Union Tee

Indus HydraulicsDOT push-in tube end, 3/16" to 5/8"union tee
Brass DOT push-in air brake union, angled view
IH-BR-DOT62

Brass DOT Push-In Air Brake Union

Indus Hydraulicspush-to-connect: the tube is pushed in, held by a gripping collet and sealed by an O-ringstraight union
Brass DOT push-in air brake × NPTF male 45° elbow, angled view
IH-BR-DOT54

Brass DOT Push-In Air Brake × NPTF Male 45° Elbow

Indus Hydraulics45° elbowDOT push-in tube end, 1/4" to 3/4"

Questions we get asked

About this range

01What are they made from?
Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
02Do the listings show part numbers and sizes?
Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
03What pressure are they rated to?
Up to 150 psi on compressed air, from −40 °F to +200 °F, as the manufacturer rates them. They are not for fuel, water, oil or any other gas.