Skive Crimp Ferrule for R9 Hose

Skive crimp ferrule for SAE 100R9 / R9R four-spiral high-pressure hoses. For SAE 100R9, SAE 100R9R, DN10 – DN51 (3/8" – 2").
Key features
- Ferrule Type: skive
- Compatible Hoses: SAE 100R9, SAE 100R9R
- Nominal Size Range: DN10 – DN51 (3/8" – 2")
- Material: Carbon steel (stainless on request)
- Ferrule Type
- skive
- Compatible Hoses
- SAE 100R9, SAE 100R9R
- Nominal Size Range
- DN10 – DN51 (3/8" – 2")
- Material
- Carbon steel (stainless on request)
- Sold By
- each
Product description
The Skive Crimp Ferrule for R9 Hose is a skive crimp ferrule for SAE 100R9, SAE 100R9R hose, available across DN10 – DN51 (3/8" – 2").
Construction
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated with trivalent (Cr3+) passivation, RoHS-compliant
- Crimp method: Cover is skived (stripped) before crimping for a direct steel-to-reinforcement bond
Performance
Pressure rating matches the host hose grade — the ferrule does not derate the assembly. Fatigue tested to ISO 6803 / SAE J343 impulse cycles when crimped to the recommended diameter on the matching crimp die.
Applicable Standards
- ISO 12151 fitting/ferrule dimension series
- SAE J517 (matched to host hose)
How to order
Specify (a) the host hose grade and bore size, (b) the matching fitting (insert) at each end, and (c) total assembly length plus orientation. Indus crimps and pressure-tests the assembly before dispatch — see the FAQ for our crimping service.
Identification
| Parameter | Value |
|---|---|
| Ferrule Type | skive |
| Compatible Hoses | SAE 100R9, SAE 100R9R |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | DN10 – DN51 (3/8" – 2") |
Construction
| Parameter | Value |
|---|---|
| Crimp Method | Cover is skived (stripped) before crimping for a direct steel-to-reinforcement bond |
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 12151 |
Commercial
| Parameter | Value |
|---|---|
| Sold By | each |
Shipping & lead time
What hose is the Skive Crimp Ferrule for R9 Hose used on?▾
What part number do I quote for the Skive Crimp Ferrule for R9 Hose, listing code IH-CF-SK-R9?▾
Which hose sizes does the Skive Crimp Ferrule for R9 Hose cover?▾
How do I choose the right size of Skive Crimp Ferrule for R9 Hose?▾
What pressure is the Skive Crimp Ferrule for R9 Hose rated for?▾
What is the Skive Crimp Ferrule for R9 Hose made from and how is it crimped?▾
Which standard does the Skive Crimp Ferrule for R9 Hose follow?▾
What does the Skive Crimp Ferrule for R9 Hose connect to?▾
How is the Skive Crimp Ferrule for R9 Hose crimped?▾
What is the difference between the Skive Crimp Ferrule for R9 Hose and the Skive Crimp Ferrule for 4SP Hose?▾
Where is the Skive Crimp Ferrule for R9 Hose made and can you export it from Dubai?▾
Do you have the Skive Crimp Ferrule for R9 Hose in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Failure analysis
Crimp too tight, crimp too loose: what each one leaves behind
A crimp is a measured diameter with a tolerance in tenths of a millimetre. Miss it in either direction and the assembly fails — but it fails differently, and the difference is visible on the failed part.
4 min read
Assembly, crimping & certification
Skiving explained: when a fitting needs it, and what happens if you skip it
Skive and no-skive fittings are not interchangeable, and the difference is invisible once the assembly is crimped. What each does, and why the mistake only shows up under pressure.
3 min read
Failure analysis
It burst at the fitting, not mid-length: what that tells you
Where a hose failed is diagnostic. A burst within a hand’s width of the ferrule almost never means the hose was under-rated — it means something at that end was wrong, and replacing like for like will do it again.
5 min read





