Dixon King Crimp Style Sleeves, Aluminum
Category image · Hoses & FittingsDixon King Crimp Style Sleeves, Aluminum in aluminum: 5 part numbers.
Product description
Dixon King Crimp Style Sleeves, Aluminum in aluminum: 5 part numbers.
Specification
- Material: Aluminum
- Part numbers: 5
Sizes and part numbers
The Sizes & Part Numbers tab lists every Dixon part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Dixon part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
5 sizes- Dixon Valve & Coupling part no.CS300-10AL
- Description
- King Crimp Sleeve, 3-3/4 L x 0.09 in Thick, Aluminum
- Dixon Valve & Coupling part no.CS400-11AL
- Description
- King Crimp Sleeve, 3-3/4 L x 0.09 in Thick, Aluminum
- Dixon Valve & Coupling part no.CS200-5AL
- Description
- King Crimp Sleeve, 2-7/8 L x 0.062 in Thick, Aluminum
- Dixon Valve & Coupling part no.CS200-12AL
- Description
- King Crimp Sleeve, 2-7/8 L x 0.062 in Thick, Aluminum
- Dixon Valve & Coupling part no.CS200-11AL
- Description
- King Crimp Sleeve, 2-7/8 L x 0.062 in Thick, Aluminum
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What are the Dixon King Crimp Style Sleeves, Aluminum used for?▾
How do I read part number CS300-10AL on the Dixon King Crimp Style Sleeves, Aluminum?▾
What sizes do the Dixon King Crimp Style Sleeves, Aluminum come in?▾
How do I choose the right sleeve from the Dixon King Crimp Style Sleeves, Aluminum range?▾
What pressure are the Dixon King Crimp Style Sleeves, Aluminum rated for?▾
What are the Dixon King Crimp Style Sleeves, Aluminum made from?▾
Which standards do the Dixon King Crimp Style Sleeves, Aluminum follow?▾
What do the Dixon King Crimp Style Sleeves, Aluminum fit?▾
How are the Dixon King Crimp Style Sleeves, Aluminum crimped?▾
What is the difference between the Dixon King Crimp Style Sleeves, Aluminum and the Dixon King Crimp Style Sleeves, Carbon Steel?▾
Where are the Dixon King Crimp Style Sleeves, Aluminum made and can you export them from Dubai?▾
Do you have the Dixon King Crimp Style Sleeves, Aluminum in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Failure analysis
Crimp too tight, crimp too loose: what each one leaves behind
A crimp is a measured diameter with a tolerance in tenths of a millimetre. Miss it in either direction and the assembly fails — but it fails differently, and the difference is visible on the failed part.
4 min read
Assembly, crimping & certification
Skiving explained: when a fitting needs it, and what happens if you skip it
Skive and no-skive fittings are not interchangeable, and the difference is invisible once the assembly is crimped. What each does, and why the mistake only shows up under pressure.
3 min read
Failure analysis
It burst at the fitting, not mid-length: what that tells you
Where a hose failed is diagnostic. A burst within a hand’s width of the ferrule almost never means the hose was under-rated — it means something at that end was wrong, and replacing like for like will do it again.
5 min read







