Skive Crimp Ferrule for 4SP Hose

Skive crimp ferrule for EN 856 4SP four-spiral premium hoses. For EN 856 4SP, DN10 – DN51 (3/8" – 2").
Key features
- Ferrule Type: skive
- Compatible Hoses: EN 856 4SP
- Nominal Size Range: DN10 – DN51 (3/8" – 2")
- Material: Carbon steel (stainless on request)
- Ferrule Type
- skive
- Compatible Hoses
- EN 856 4SP
- Nominal Size Range
- DN10 – DN51 (3/8" – 2")
- Material
- Carbon steel (stainless on request)
- Sold By
- each
Product description
The Skive Crimp Ferrule for 4SP Hose is a skive crimp ferrule for EN 856 4SP hose, available across DN10 – DN51 (3/8" – 2").
Construction
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated with trivalent (Cr3+) passivation, RoHS-compliant
- Crimp method: Cover is skived (stripped) before crimping for a direct steel-to-reinforcement bond
Performance
Pressure rating matches the host hose grade — the ferrule does not derate the assembly. Fatigue tested to ISO 6803 / SAE J343 impulse cycles when crimped to the recommended diameter on the matching crimp die.
Applicable Standards
- ISO 12151 fitting/ferrule dimension series
- EN 853 / EN 856 / EN 857 (matched to host hose)
How to order
Specify (a) the host hose grade and bore size, (b) the matching fitting (insert) at each end, and (c) total assembly length plus orientation. Indus crimps and pressure-tests the assembly before dispatch — see the FAQ for our crimping service.
Identification
| Parameter | Value |
|---|---|
| Ferrule Type | skive |
| Compatible Hoses | EN 856 4SP |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | DN10 – DN51 (3/8" – 2") |
Construction
| Parameter | Value |
|---|---|
| Crimp Method | Cover is skived (stripped) before crimping for a direct steel-to-reinforcement bond |
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 12151 |
Commercial
| Parameter | Value |
|---|---|
| Sold By | each |
Shipping & lead time
Sizes & part numbers
6 sizes- Indus part no.IH-CF-SK-4SP-04
- Hose bore
- -04 · 1/4" · DN6
- D (mm)
- 22
- L (mm)
- 37.5
- Indus part no.IH-CF-SK-4SP-06
- Hose bore
- -06 · 3/8" · DN10
- D (mm)
- 25.5
- L (mm)
- 39
- Indus part no.IH-CF-SK-4SP-08
- Hose bore
- -08 · 1/2" · DN12
- D (mm)
- 29
- L (mm)
- 41
- Indus part no.IH-CF-SK-4SP-10
- Hose bore
- -10 · 5/8" · DN16
- D (mm)
- 32.5
- L (mm)
- 43
- Indus part no.IH-CF-SK-4SP-12
- Hose bore
- -12 · 3/4" · DN20
- D (mm)
- 37
- L (mm)
- 51
- Indus part no.IH-CF-SK-4SP-16
- Hose bore
- -16 · 1" · DN25
- D (mm)
- 46.5
- L (mm)
- 64.5
D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the Skive Crimp Ferrule for 4SP Hose and what hose does it fit?▾
How do I read part number IH-CF-SK-4SP-04 on the Skive Crimp Ferrule for 4SP Hose?▾
Which hose sizes does the Skive Crimp Ferrule for 4SP Hose cover?▾
How do I choose the right size of Skive Crimp Ferrule for 4SP Hose?▾
What pressure is the Skive Crimp Ferrule for 4SP Hose rated for?▾
What is the Skive Crimp Ferrule for 4SP Hose made from and how is it crimped?▾
Which standard does the Skive Crimp Ferrule for 4SP Hose follow?▾
What does the Skive Crimp Ferrule for 4SP Hose connect to?▾
How is the Skive Crimp Ferrule for 4SP Hose crimped?▾
What is the difference between the Skive Crimp Ferrule for 4SP Hose and the Skive Crimp Ferrule for R9 Hose?▾
Where is the Skive Crimp Ferrule for 4SP Hose made and can you export it from Dubai?▾
Do you have the Skive Crimp Ferrule for 4SP Hose in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this part
Maintenance & reliability
Crimping on site or adapting a line: choosing under pressure
Machine down, two ways out, and the wrong choice is usually the one that felt faster. What each option actually commits you to.
3 min read
Assembly, crimping & certification
Hydraulic hose assembly: specifying, cutting, crimping, testing and tagging
A hose assembly is a manufactured part, not a length of hose with ends on. The steps that make one right — from the specification to the crimp diameter, the proof test and the tag — and the mistakes that make one wrong.
6 min read




