Specialty Crimp Ferrule for PTFE / Teflon Hose

Specialty crimp ferrule dimensioned for PTFE-tube hoses with stainless-steel or polyurethane outer cover. For SAE 100R14 (PTFE / Teflon), DN6 – DN25 (1/4" – 1").
Key features
- Ferrule Type: special
- Compatible Hoses: SAE 100R14 (PTFE / Teflon)
- Nominal Size Range: DN6 – DN25 (1/4" – 1")
- Material: Carbon steel (stainless on request)
- Ferrule Type
- special
- Compatible Hoses
- SAE 100R14 (PTFE / Teflon)
- Nominal Size Range
- DN6 – DN25 (1/4" – 1")
- Material
- Carbon steel (stainless on request)
- Sold By
- each
Product description
The Specialty Crimp Ferrule for PTFE / Teflon Hose is a specialty crimp ferrule for SAE 100R14 (PTFE / Teflon) hose, available across DN6 – DN25 (1/4" – 1").
Construction
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated with trivalent (Cr3+) passivation, RoHS-compliant
- Crimp method: Specialty construction matched to the host hose
- PTFE-specific dimensions — do NOT use on rubber hoses
Performance
Pressure rating matches the host hose grade — the ferrule does not derate the assembly. Fatigue tested to ISO 6803 / SAE J343 impulse cycles when crimped to the recommended diameter on the matching crimp die.
Applicable Standards
- ISO 12151 fitting/ferrule dimension series
- SAE J517 (matched to host hose)
How to order
Specify (a) the host hose grade and bore size, (b) the matching fitting (insert) at each end, and (c) total assembly length plus orientation. Indus crimps and pressure-tests the assembly before dispatch — see the FAQ for our crimping service.
Identification
| Parameter | Value |
|---|---|
| Ferrule Type | special |
| Compatible Hoses | SAE 100R14 (PTFE / Teflon) |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | DN6 – DN25 (1/4" – 1") |
Construction
| Parameter | Value |
|---|---|
| Crimp Method | Specialty construction matched to the host hose |
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 12151 |
Commercial
| Parameter | Value |
|---|---|
| Sold By | each |
Shipping & lead time
Sizes & part numbers
10 sizes- Indus part no.IH-CF-TEFLON-02
- Hose bore
- -02 · 1/8" · DN4
- D (mm)
- 9.5
- L (mm)
- 14.3
- Indus part no.IH-CF-TEFLON-03
- Hose bore
- -03 · 3/16" · DN5
- D (mm)
- 11.9
- L (mm)
- 27.5
- Indus part no.IH-CF-TEFLON-04
- Hose bore
- -04 · 1/4" · DN6
- D (mm)
- 14.2
- L (mm)
- 30.7
- Indus part no.IH-CF-TEFLON-05
- Hose bore
- -05 · 5/16" · DN8
- D (mm)
- 16
- L (mm)
- 30.6
- Indus part no.IH-CF-TEFLON-06
- Hose bore
- -06 · 3/8" · DN10
- D (mm)
- 19
- L (mm)
- 32.1
- Indus part no.IH-CF-TEFLON-08
- Hose bore
- -08 · 1/2" · DN12
- D (mm)
- 23.8
- L (mm)
- 34.3
- Indus part no.IH-CF-TEFLON-10
- Hose bore
- -10 · 5/8" · DN16
- D (mm)
- 27
- L (mm)
- 37
- Indus part no.IH-CF-TEFLON-12
- Hose bore
- -12 · 3/4" · DN20
- D (mm)
- 30.2
- L (mm)
- 42.8
Show all 10 sizesShow fewer sizes
- Indus part no.IH-CF-TEFLON-14
- Hose bore
- -14 · 7/8" · DN22
- D (mm)
- 33.4
- L (mm)
- 42.7
- Indus part no.IH-CF-TEFLON-16
- Hose bore
- -16 · 1" · DN25
- D (mm)
- 36.5
- L (mm)
- 50.8
D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What is the Specialty Crimp Ferrule for PTFE / Teflon Hose and what hose does it fit?▾
How do I read part number IH-CF-TEFLON-02 on the Specialty Crimp Ferrule for PTFE / Teflon Hose?▾
What sizes does the Specialty Crimp Ferrule for PTFE / Teflon Hose come in?▾
How do I choose the right size of Specialty Crimp Ferrule for PTFE / Teflon Hose?▾
What pressure is the Specialty Crimp Ferrule for PTFE / Teflon Hose rated for?▾
What is the Specialty Crimp Ferrule for PTFE / Teflon Hose made from and how is it crimped?▾
Which standard does the Specialty Crimp Ferrule for PTFE / Teflon Hose follow?▾
What does the Specialty Crimp Ferrule for PTFE / Teflon Hose connect to?▾
How is the Specialty Crimp Ferrule for PTFE / Teflon Hose crimped?▾
What is the difference between the Specialty Crimp Ferrule for PTFE / Teflon Hose and the Crimp Ferrule for SAE 100R5 Hose?▾
Where is the Specialty Crimp Ferrule for PTFE / Teflon Hose made and can you export it from Dubai?▾
Do you have the Specialty Crimp Ferrule for PTFE / Teflon Hose in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this part
Assembly, crimping & certification
PTFE (R14) and R5 textile hose ends: two hoses where the dash size is not the bore
A -4 R14 PTFE hose has a 3/16" bore, not 1/4" — and so does a -4 R5. Both hoses are sized to tube OD, both need their own hose ends, and both turn up where ordinary hydraulic hose will not do: PTFE for heat to 450 °F and aggressive fluids, R5 for engines, fuel and air brakes. Construction, ratings by size, the static-dissipative PTFE you need for fuels and oils, and the hose ends for each.
5 min read
Industrial hose
PTFE hose explained: smoothbore against convoluted, and where each one belongs
PTFE is the most chemically inert hose liner there is, and it runs from −73 to +260 °C. The difference between smoothbore and convoluted PTFE hose, what the braid adds, and how it compares with R14.
3 min read





