Aeroquip Compression Sleeve Hydraulic Hose Fitting

Aeroquip Compression Sleeve Hydraulic Hose Fitting in brass: 6 part numbers.
Product description
Aeroquip Compression Sleeve Hydraulic Hose Fitting in brass: 6 part numbers.
Specification
- Type: Hydraulic Hose Fitting
- Material: Brass
- Part numbers: 6
Sizes and part numbers
The Sizes & Part Numbers tab lists every Aeroquip part number in this range with its connections. Ratings vary by size — check the row for the part you order.
Hose and fitting match
A crimp fitting is rated only on the hose series it is designed for. Quote the hose type and size with the fitting part number so the fitting, ferrule and crimp specification can be checked against the hose before supply.
How to order
Quote the Aeroquip part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Specific Fitting Shape | Sleeve |
Shipping & lead time
Sizes & part numbers
6 sizes- Eaton Aeroquip part no.900568-4B
- Description
- Hose Fitting Sleeve 3/16 In
- Eaton Aeroquip part no.900568-6B
- Description
- Hose Fitting Sleeve 5/16 In
- Eaton Aeroquip part no.900568-8B
- Description
- Hose Fitting Sleeve 7/8 In
- Eaton Aeroquip part no.900568-10B
- Description
- Hose Fitting Sleeve 1/2 In
- Eaton Aeroquip part no.900568-12B
- Description
- Hose Fitting Sleeve 5/8 In
- Eaton Aeroquip part no.900568-16B
- Description
- Hose Fitting Sleeve 7/8 In
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
What is the Aeroquip Compression Sleeve Hydraulic Hose Fitting used for?▾
How do I read part number 900568-6B on the Aeroquip Compression Sleeve Hydraulic Hose Fitting?▾
What sizes does the Aeroquip Compression Sleeve Hydraulic Hose Fitting come in?▾
How do I choose the right size of the Aeroquip Compression Sleeve Hydraulic Hose Fitting?▾
What pressure is the Aeroquip Compression Sleeve Hydraulic Hose Fitting rated for?▾
What is the Aeroquip Compression Sleeve Hydraulic Hose Fitting made from?▾
Which standards does the Aeroquip Compression Sleeve Hydraulic Hose Fitting follow?▾
What does the Aeroquip Compression Sleeve Hydraulic Hose Fitting fit?▾
How is the Aeroquip Compression Sleeve Hydraulic Hose Fitting fitted?▾
What is the difference between the Aeroquip Compression Sleeve Hydraulic Hose Fitting and the Crimp Ferrule for SAE 100R5 Hose?▾
Where is the Aeroquip Compression Sleeve Hydraulic Hose Fitting made and can you export it from Dubai?▾
Do you have the Aeroquip Compression Sleeve Hydraulic Hose Fitting in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this range
Failure analysis
Crimp too tight, crimp too loose: what each one leaves behind
A crimp is a measured diameter with a tolerance in tenths of a millimetre. Miss it in either direction and the assembly fails — but it fails differently, and the difference is visible on the failed part.
4 min read
Assembly, crimping & certification
Skiving explained: when a fitting needs it, and what happens if you skip it
Skive and no-skive fittings are not interchangeable, and the difference is invisible once the assembly is crimped. What each does, and why the mistake only shows up under pressure.
3 min read
Failure analysis
It burst at the fitting, not mid-length: what that tells you
Where a hose failed is diagnostic. A burst within a hand’s width of the ferrule almost never means the hose was under-rated — it means something at that end was wrong, and replacing like for like will do it again.
5 min read







