Double-Skive Crimp Ferrule for R13 Hose
Double-skive crimp ferrule for SAE 100R13 multi-spiral very-high-pressure hoses. For SAE 100R13, DN10 – DN51 (3/8" – 2").
Key features
- Ferrule Type: double-skive
- Compatible Hoses: SAE 100R13
- Nominal Size Range: DN10 – DN51 (3/8" – 2")
- Material: Carbon steel (stainless on request)
- Ferrule Type
- double-skive
- Compatible Hoses
- SAE 100R13
- Nominal Size Range
- DN10 – DN51 (3/8" – 2")
- Material
- Carbon steel (stainless on request)
- Sold By
- each
Product description
The Double-Skive Crimp Ferrule for R13 Hose is a double-skive crimp ferrule for SAE 100R13 hose, available across DN10 – DN51 (3/8" – 2").
Construction
- Material: Carbon steel (stainless steel available on request)
- Surface treatment: Zinc-plated with trivalent (Cr3+) passivation, RoHS-compliant
- Crimp method: Both inner tube and outer cover are skived — for very-high-pressure spiral hoses
Performance
Pressure rating matches the host hose grade — the ferrule does not derate the assembly. Fatigue tested to ISO 6803 / SAE J343 impulse cycles when crimped to the recommended diameter on the matching crimp die.
Applicable Standards
- ISO 12151 fitting/ferrule dimension series
- SAE J517 (matched to host hose)
How to order
Specify (a) the host hose grade and bore size, (b) the matching fitting (insert) at each end, and (c) total assembly length plus orientation. Indus crimps and pressure-tests the assembly before dispatch — see the FAQ for our crimping service.
Identification
| Parameter | Value |
|---|---|
| Ferrule Type | double-skive |
| Compatible Hoses | SAE 100R13 |
Dimensions
| Parameter | Value |
|---|---|
| Nominal Size Range | DN10 – DN51 (3/8" – 2") |
Construction
| Parameter | Value |
|---|---|
| Crimp Method | Both inner tube and outer cover are skived — for very-high-pressure spiral hoses |
| Material | Carbon steel (stainless on request) |
| Surface Treatment | Zinc-plated, Cr3+ passivated, RoHS-compliant |
Compliance
| Parameter | Value |
|---|---|
| Applicable Standards | ISO 12151 |
Commercial
| Parameter | Value |
|---|---|
| Sold By | each |
Shipping & lead time
Sizes & part numbers
5 sizes| Indus part no. | Hose bore | D (mm) | L (mm) |
|---|---|---|---|
| IH-CF-DS-R13-12 | -12 · 3/4" · DN20 | 40 | 53 |
| IH-CF-DS-R13-16 | -16 · 1" · DN25 | 49 | 66 |
| IH-CF-DS-R13-20 | -20 · 1.1/4" · DN32 | 60 | 88.5 |
| IH-CF-DS-R13-24 | -24 · 1.1/2" · DN40 | 69.5 | 102 |
| IH-CF-DS-R13-32 | -32 · 2" · DN50 | 86.5 | 108 |
D — Dimension D on the manufacturer dimension drawing. L — Dimension L on the manufacturer dimension drawing. Ask us for the dimension drawing if you need it stamped.
Every size is available in 316 stainless steel on request — add “-SS” to the part number when you enquire.
What hoses does this ferrule fit?▾
Skive or no-skive — what is the difference?▾
What crimp die do I need?▾
Is the ferrule pressure-rated separately from the hose?▾
Can a crimped ferrule be reused?▾
What materials are available?▾
Lead time and crimping service?▾
How is this product sold?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 126 destinations
The same part, in the designations used across European and Gulf trade catalogues.
- de
- Presshülse
- fr
- jupe de sertissage
- es
- casquillo de prensado
- it
- boccola di pressatura
From the blog
Written about this part
Failure analysis
Crimp too tight, crimp too loose: what each one leaves behind
A crimp is a measured diameter with a tolerance in tenths of a millimetre. Miss it in either direction and the assembly fails — but it fails differently, and the difference is visible on the failed part.
3 min read
Procurement & export
Should you buy a crimper? The real economics of making your own hoses
Sometimes the answer is yes. The machine is rarely the expensive part, the dies usually are, and the thing that decides it is not cost at all — it is how far away your machines break down.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Engineers viewing this also looked at
No-Skive Crimp Ferrule for 1SN / 2SN Hose
No-Skive Crimp Ferrule for Automotive A/C Hose (SAE J2064)
No-Skive Crimp Ferrule for R1AT / 1SN Hose
No-Skive Crimp Ferrule for R2AT / 2SN Hose
No-Skive Crimp Ferrule for R7 / R8 Thermoplastic Hose
Crimp Ferrule for SAE 100R5 Hose
Skive Crimp Ferrule for 4SH Hose, DN10–DN16
