Eaton Bulk Hydraulic Hoses

Eaton Bulk Hydraulic Hoses, 1/4" to 1/2": 4 part numbers.
Product description
Eaton Bulk Hydraulic Hoses, 1/4" to 1/2": 4 part numbers.
Specification
- Type: Hydraulic Hose
- Size range: 1/4" to 1/2"
- Pressure stated by the maker: 2,050 to 3,050 psi (141 to 210 bar), by size
- Temperature: -40°F to +212°F
- Cover Material: Polyurethane
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Eaton part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Eaton part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Color | Black |
| Compatible Chemicals | Air, Diesel Fuel, Ethyl Acetate, Ethylene Glycol (Not to Exceed +150F), Formaldehyde, Fuel Oil, Gasoline, Glycerin (Not to Exceed +150), Heptane, Hexane, Hydrogen Peroxide, Kerosene, Lithium Grease, L |
| Cover Material | Polyurethane |
| Hose Braid Layers | 1 |
| Hose Configuration | Bulk Hose |
| Series | 3TR7 Series |
| Tube Material | Nylon |
Shipping & lead time
Sizes & part numbers
4 sizes- Eaton Aeroquip part no.3TR7-08-50
- Description
- Hydraulic Hose, 3000 psi, 1/2 Inch Hose I.D., 13/16 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -08 · 1/2"
- Min burst (bar)
- 621
- Min bend radius (mm)
- 69.8
- Working pressure (bar)
- 141
- Eaton Aeroquip part no.3TR7-04-50
- Description
- Hydraulic Hose, 3000 psi, 1/4 Inch Hose I.D., 1/2 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -04 · 1/4"
- Min burst (bar)
- 758
- Min bend radius (mm)
- 31.8
- Working pressure (bar)
- 210
- Eaton Aeroquip part no.3TR7-05-50
- Description
- Hydraulic Hose, 3000 psi, 5/16 Inch Hose I.D., 9/16 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -05 · 5/16"
- Min burst (bar)
- 689
- Min bend radius (mm)
- 38.1
- Working pressure (bar)
- —
- Eaton Aeroquip part no.3TR7-06-50
- Description
- Hydraulic Hose, 3000 psi, 3/8 Inch Hose I.D., 41/64 Inch Hose O.D., 50 ft Hose Lg
- Hose bore
- -06 · 25/64"
- Min burst (bar)
- 621
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 159
Description — What this part number is, as the manufacturer lists it. Min burst — Minimum burst pressure. A test figure, never a working limit — never select on it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Eaton Bulk Hydraulic Hoses used for?▾
Which sizes does the Eaton Bulk Hydraulic Hoses come in?▾
What does part number 3TR7-05-50 of the Eaton Bulk Hydraulic Hoses cover?▾
What is the working pressure of the Eaton Bulk Hydraulic Hoses?▾
What temperatures and fluids suit the Eaton Bulk Hydraulic Hoses?▾
Which standard does the Eaton Bulk Hydraulic Hoses meet?▾
Which fittings and ferrules do I use on the Eaton Bulk Hydraulic Hoses?▾
How should I route the Eaton Bulk Hydraulic Hoses and what is the minimum bend radius?▾
How do I match the size of the Eaton Bulk Hydraulic Hoses to my old hose?▾
Eaton Bulk Hydraulic Hoses or Eaton Danfoss H009 Series Rubber Hydraulic Braided Hoses: which should I choose?▾
Where does the Eaton Bulk Hydraulic Hoses come from and how is it shipped?▾
Do you stock the Eaton Bulk Hydraulic Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








