Enerpac HT Series Hydraulic Hoses

Enerpac HT Series Hydraulic Hoses: 4 part numbers.
Product description
Enerpac HT Series Hydraulic Hoses: 4 part numbers.
Specification
- Type: Hydraulic Hose
- Pressure stated by the maker: 21,750 psi (1,500 bar)
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Enerpac part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Enerpac part number. Price and lead time are confirmed with the quotation.
Shipping & lead time
Sizes & part numbers
4 sizes- Enerpac part no.HT1503HR
- Description
- Hose, 1m, With Quick Disconnect Couplings And Dust Cap, 1500 Bar
- Working pressure (bar)
- 1500
- Enerpac part no.HT1510HR
- Description
- Hose, 3m, With Quick Disconnect Couplings And Dust Cap, 1500 Bar
- Working pressure (bar)
- 1500
- Enerpac part no.HT1503
- Description
- Hose, 1m, 1500 Bar
- Working pressure (bar)
- 1500
- Enerpac part no.HT1510
- Description
- Hose, 3m, 1500 Bar
- Working pressure (bar)
- 1500
Description — What this part number is, as the manufacturer lists it. Ask us for the dimension drawing if you need it stamped.
Working pressure is the manufacturer’s published rating for the fitting itself. An assembly is limited by its lowest-rated component, so check it against the hose, the tube and the port you are mating to.
What are Enerpac HT series hydraulic hoses used for?▾
How do I read the Enerpac HT part numbers HT1503HR and HT1510?▾
Which lengths do Enerpac HT series hoses come in?▾
What is the difference between Enerpac HT1503 and HT1503HR?▾
What is the working pressure of Enerpac HT series hoses?▾
What are Enerpac HT series hoses made of, and what fluid do they carry?▾
Do Enerpac HT series hoses carry a standard or certificate?▾
What do Enerpac HT series hoses connect to?▾
How should I look after an Enerpac HT series hose?▾
Should I buy the 1 m or 3 m Enerpac HT series hose?▾
Where are Enerpac HT series hoses made?▾
Do you stock Enerpac HT series hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








