Gates CM2T Wire Braid Hoses

Gates CM2T Wire Braid Hoses, 3/8" to 1/2": 4 part numbers.
Product description
Gates CM2T Wire Braid Hoses, 3/8" to 1/2": 4 part numbers.
Specification
- Type: Wire Braid Hose
- Size range: 3/8" to 1/2"
- Pressure stated by the maker: 4,000 to 4,800 psi (276 to 331 bar), by size
- Temperature: -40°F to +212°F
- Reinforcement Construction: 2 Braid, Wire
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Gates part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Gates part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Recommended For | High Abrasive High-Pressure Hydraulic Oil Lines Joined Together For Easier plumbing And Routing. Meets SAE 100R16 Requirements. Cm2T Hose Has Smaller Exterior Dimensions And Significantly Tighter Bend |
| Tube Type | Nitrile, Type C, Black, Hyd Fluids, Phosphate Esters, Water Glycol |
Shipping & lead time
Sizes & part numbers
4 sizes- Gates part no.46574975
- Description
- Wire Braid Hose, 0.5 Inch I.D, 0.82 Inch O.D, 4000 PSI, Black
- Hose bore
- -08 · 1/2"
- Min burst (bar)
- 276
- Min bend radius (mm)
- 127
- Working pressure (bar)
- 276
- Gates part no.46574981
- Description
- Wire Braid Hose, 0.5 Inch I.D, 0.82 Inch O.D, 4000 PSI, Black
- Hose bore
- -08 · 1/2"
- Min burst (bar)
- 276
- Min bend radius (mm)
- 127
- Working pressure (bar)
- 276
- Gates part no.46574980
- Description
- Wire Braid Hose, 0.375 Inch I.D, 0.7 Inch O.D, 4800 PSI, Black
- Hose bore
- -06 · 3/8"
- Min burst (bar)
- 331
- Min bend radius (mm)
- 88.9
- Working pressure (bar)
- 331
- Gates part no.46574974
- Description
- Wire Braid Hose, 0.375 Inch I.D, 0.7 Inch O.D, 4800 PSI, Black
- Hose bore
- -06 · 3/8"
- Min burst (bar)
- 331
- Min bend radius (mm)
- 88.9
- Working pressure (bar)
- 331
Description — What this part number is, as the manufacturer lists it. Min burst — Minimum burst pressure. A test figure, never a working limit — never select on it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Gates CM2T Wire Braid Hoses used for?▾
Which sizes does the Gates CM2T Wire Braid Hoses come in?▾
What does part number 46574980 of the Gates CM2T Wire Braid Hoses cover?▾
What is the working pressure of the Gates CM2T Wire Braid Hoses?▾
What temperatures and fluids suit the Gates CM2T Wire Braid Hoses?▾
Which standard does the Gates CM2T Wire Braid Hoses meet?▾
Which fittings and ferrules do I use on the Gates CM2T Wire Braid Hoses?▾
How should I route the Gates CM2T Wire Braid Hoses and what is the minimum bend radius?▾
What applications is the Gates CM2T Wire Braid Hoses recommended for?▾
Gates CM2T Wire Braid Hoses or Gates CR1 1-Wire Braid Hoses: which should I choose?▾
Where does the Gates CM2T Wire Braid Hoses come from and how is it shipped?▾
Do you stock the Gates CM2T Wire Braid Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








