Gates C5D Hydraulic Hoses

Gates C5D Hydraulic Hoses, 3/16" to 0.406": 4 part numbers.
Product description
Gates C5D Hydraulic Hoses, 3/16" to 0.406": 4 part numbers.
Specification
- Type: Hydraulic Hose
- Size range: 3/16" to 0.406"
- Pressure stated by the maker: 1,250 to 1,500 psi (86 to 103 bar), by size
- Temperature: -40°F to +300°F
- Reinforcement Construction: 2 Braid, Textile, Wire
- Part numbers: 4
Sizes and part numbers
The Sizes & Part Numbers tab lists every Gates part number in this range with its ratings. Ratings vary by size — check the row for the part you order.
Choosing the hose
Select hose on working pressure, bore, temperature and fluid. The working pressure in the size table is the maximum for continuous duty; burst pressure is a test figure, not a working limit. End fittings must be from the series the hose maker approves for that hose.
How to order
Quote the Gates part number. Price and lead time are confirmed with the quotation.
Specifications
| Parameter | Value |
|---|---|
| Cover Type | Polyester Braid Impregnated W/ Synthetic Rubber, Green, Standard |
| Tube Type | Cpe, Type J, Black, Heat, Oil Resistant |
Shipping & lead time
Sizes & part numbers
4 sizes- Gates part no.36580022
- Description
- Hydraulic Hose, 0.406 Inch I.D, 0.77 Inch O.D, 1250 PSI, Green
- Hose bore
- -06 · 0.406"
- Min burst (bar)
- 86
- Min bend radius (mm)
- 50.8
- Working pressure (bar)
- 86
- Gates part no.36580007
- Description
- Hydraulic Hose, 0.25 Inch I.D, 0.58 Inch O.D, 1500 PSI, Green
- Hose bore
- -04 · 1/4"
- Min burst (bar)
- 103
- Min bend radius (mm)
- 38.1
- Working pressure (bar)
- 103
- Gates part no.36580001
- Description
- Hydraulic Hose, 0.1875 Inch I.D, 0.52 Inch O.D, 1500 PSI, Green
- Hose bore
- -03 · 3/16"
- Min burst (bar)
- 103
- Min bend radius (mm)
- 25.4
- Working pressure (bar)
- 103
- Gates part no.36580002
- Description
- Hydraulic Hose, 0.3125 Inch I.D, 0.67 Inch O.D, 1500 PSI, Green
- Hose bore
- -05 · 5/16"
- Min burst (bar)
- 103
- Min bend radius (mm)
- 45.7
- Working pressure (bar)
- 103
Description — What this part number is, as the manufacturer lists it. Min burst — Minimum burst pressure. A test figure, never a working limit — never select on it. Min bend radius — Tightest centreline radius the hose may be bent to at full working pressure.
Working pressure is the published rating for the hose itself. A made-up assembly is limited by its lowest-rated part, so check it against the coupling, the clamp or ferrule, and the temperature you are running at.
Cut lengths and made-up assemblies are prepared in Dubai. Tell us the bore, the length and the ends you need.
What is the Gates C5D Hydraulic Hoses used for?▾
Which sizes does the Gates C5D Hydraulic Hoses come in?▾
What does part number 36580001 of the Gates C5D Hydraulic Hoses cover?▾
What is the working pressure of the Gates C5D Hydraulic Hoses?▾
What temperatures and fluids suit the Gates C5D Hydraulic Hoses?▾
Which standard does the Gates C5D Hydraulic Hoses meet?▾
Which fittings and ferrules do I use on the Gates C5D Hydraulic Hoses?▾
How should I route the Gates C5D Hydraulic Hoses and what is the minimum bend radius?▾
How do I match the size of the Gates C5D Hydraulic Hoses to my old hose?▾
Gates C5D Hydraulic Hoses or Gates C5M Hydraulic Hoses: which should I choose?▾
Where does the Gates C5D Hydraulic Hoses come from and how is it shipped?▾
Do you stock the Gates C5D Hydraulic Hoses in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Machine down
Detaching a hose on a modern machine: guards, clips and the ones that fight back
On a machine built in the last fifteen years, getting to the hose takes longer than changing it. Most of that time is spent undoing things nobody photographed.
5 min read
Procurement & export
Bulk hose by the metre, or finished assemblies?
Buying hose on a reel and crimping your own looks cheaper and sometimes is. The decision turns on whether you can state a crimp diameter and prove you hit it.
3 min read
Failure analysis
Cover blistering and pinholes: usually permeation, not a defect
A bubble under the cover looks like a manufacturing fault and normally is not. It is gas that got through the tube and could not get out through the cover — which tells you something specific about the fluid and the duty.
4 min read








